Philips DBS-EX23-530 manual Slave Cabinet Set-Up, DMS-100

Slave Cabinet Set-Up

Refer to “Typical Central Office Configurations” for setting the following options. Default settings are bold.

Note: Observe the following Special Installation Note when adding a second cabinet:

If you are adding a second cabinet (slave) to an existing installation that has a Primary Rate span configured, you must re-database the number of ISDN channels in the Master cabinet. The re-dimensioning of the system to the new double cabinet (master/slave) configuration

causes

(0-23) to be reset to the default value of zero (0).

Set up Slave Span

(0-1) Network Type

0-Public

1-Private

(0-1) Auto Progress

0-Disable

1-Enable

(0-2) NSF

0-None

1-SDN

2-MegaCom

(0-3) - ISDN CO Type

0- 4ESS

1- 5ESS

2- Reserved

3- DMS-100

(0-1) ISDN International

Dial Code Deduction

0-Send as is

1-Deduct 0 1 1 from the code

DBS-2.3-400 DBS Manual - Revised April 2000 Page A-19