Philips DBS-EX23-530 manual Multiple did Programming, =DID data on display, =Off

Quick-Start Programming Programming Initial ISDN Options

12.Specify the extension number to call for each ISDN incoming DID number (page 4-29).

Address

FF1 9# 3# (0000-9999)# (100-699)#

13.Some ISDN lines provide Automatic Number Identification (ANI). This service is similar to Caller ID by providing the number of the calling party. For DID calls with ANI information provided, determine if ANI data or DID data is displayed on the called telephone..

Address	FF3 (Ext Port)# 54# (0-1)#
Options	0=DID data on display
	1=ANI data on display

14.If you need to program multiple extensions to ring with DIDs, go to the instructions under “Slave Cabinet Set-UpMultiple DID Programming.”

If you do not need to program multiple DIDs, you are finished with initial ISDN programming. Reset the DBS by turning it off then on again.

Multiple DID Programming

1.If you wish to assign the same DID number to more than one station, enable Multiple DID/DNIS numbering (page 4-33).

Address	FF1 2# 1# 32# (0-1)#
Options	0=Off
	1=On

2. Assign the ISDN DID numbers to stations (page 4-29).

Address

FF1 9# 3# (0000-9999)# (10-69 or 100-699)#

3. Reset the DBS by turning it off then on again.

Revised April 2000 DBS-EX23-530 3-9