Philips DBS-EX23-530 manual Extension Port Settings, Digital Pad SettingsProgramming Reference

Digital Pad SettingsProgramming Reference

Extension Port Settings

Parameter	Station Port Class
Description	By default, DBS phones are assigned a circuit type, based on
	whether they are KTELs or SLTs.
	The circuit type is used with digital pad settings to determine the
	loss/gain settings for connections to the ISDN. (See “Digital Pad
	Setting” on page 4-12.)
	The Port Class parameter is provided in case a specific phone or
	group of phones needs a unique pad level.
	For example, an SLT is assigned by default as “circuit type 2.” How-
	ever, if an SLT in a remote warehouse has inadequate volume levels,
	the circuit type for the SLT could be changed to 7 (Option 1). Once
	the SLT is changed to circuit type 7, the pad levels for circuit type 7
	could be changed to provide the correct volume setting.
	Note: Circuit types are also provided for trunk ports. See Figure 4-1
	on page 4-12for a definition of circuit types.
Programming	FF3 (1-144)# 37# (1-2 or 7-8)#
Options	This programming parameter will allow you to assign circuit types
	1-12 to a station port. However, the only circuit types that should be
	used with a station port are circuit types 1, 2, 7, or 8. (Circuit types 7
	and 8 are used to assign unique PAD levels to circuits that require
	special volume levels.)

4-14 DBS-EX23-530 Revised April 2000