Philips DBS-EX23-530 manual Programming Reference Special Isdn Function Codes

Programming Reference Special ISDN Function Codes

Parameter	Remote Loopback
Description	This command only applies to a DBS within a private network.
	The command is entered at one DBS in order to loopback through
	another DBS.
	For example, to initiate a loopback from DBS “B” to DBS “A,”
	this command would be entered at DBS “B.” In order for the loop-
	back to work, DBS “A” must have the “Remote Loopback” option
	turned on in system programming.
	Notes:
	1. The clock source of the DBS that issues this command must be
	set to “free run.”
	2. Before executing this command, you must first enter the pro-
	gramming authorization code (#98 9999). This command only
	applies to a DBS within a private network.
	The command is entered at one DBS in order to loopback through
	another DBS.
	For example, to initiate a loopback from DBS “B” to DBS “A,”
	this command would be entered at DBS “B.” In order for the loop-
	back to work, DBS “A” must have the “Remote Loopback” option
	(page 4-37)turned on in system programming.
	Notes:
	1. The clock source of the DBS that issues this command must be
	set to “free run.”
	2. Before executing this command, you must first enter the pro-
	gramming authorization code (#98 9999).
Execution	Master: ON/OFF #94 3 (0 or 1)
	Slave: ON/OFF #95 3 (0 or 1)
Options	0=Off
	1=On

Parameter	AIS Signal Transmission
Description	Transmits an AIS signal (all 1s) to the CO.
	Note: Before executing this code, you must first enter the pro-
	gramming authorization code (#98 9999).
Execution	Master: ON/OFF #94 4 (0 or 1)
	Slave: ON/OFF #95 4 (0 or 1)
Options	0=Off
	1=On

Revised April 2000 DBS-EX23-530 4-37