Philips DBS-EX23-530 manual Nortel NT DMS100, Info Needed from CO Comments examples

- ISDN International Code Deduct 0 1 1

-Set to (1) to deduct 0 1 1 from the CO Setup message.

Nortel (NT) DMS100

CO Type (3) DMS100 (This is the default setting.)

The ISDN PRI provides a flexible method of providing access to the Public Switched Telephone Network (PSTN). Because of the many ways that the CO can configure an ISDN span, it is essential that the DBS configuration and the provisioning of the CO are compatible. The following tables identify the critical parameters that must be set for proper operation. These tables also provide a list of information that must be gathered on the CO, as well as the type of information that the CO needs to know about the DBS system.

#	Info Needed from CO	Comments (examples)
1	Manufacture of CO and	5E11 (5ESS with load 11), DMS-100 with NA008
	software load
2	Is local dialing 7 digits, 10
	digits or a combination?
3	For long distance dialing,	-	-	-	, or
	does the CO want to see the
			-	-
	leading 1 ?
4	For international dialing,	0 1 1 -(15-digit number) or (15-digit number)
	does the CO want to see the
	leading 0 1 1 ?
#	Typical Info for CO	Comments (examples)
1	Installation Address
2	Is this a new installation?
3	Extended wiring beyond
	phone room?
4	Main phone number of
	installation
5	Contact person for installa-
	tion
	Contact for order informa-
	tion
6	Billing name
7	Billing address

DBS-2.3-400 DBS Manual - Revised April 2000 Page A-21