Hand Held Products 7400/7450 manual Reading a Bar code, Linear bar code 2D Matrix symbol

Reading A Bar code

1.Press the ON/SCAN button on the 7400 or the Scan Trigger on the 7450 to project the scanner’s bright red or green aim- ing beam. The aiming beam should be oriented in line with the bar code to achieve the quickest read. A range of 4-10 inches (10-25 cm) is recommended.

2.Center the aiming beam over the bar code. The red SCAN LED illuminates when the user presses the ON/KEY key, and the green DECODE LED illuminates when a bar code is successfully decoded and the terminal beeps.

Decode LED Scan LED

Linear bar code 2D Matrix symbol

4 - 2