Caller ID
To store Caller ID information in the table:
1.Answer call.
2.Press 
and dial 
.
●If a confirmation tone (one short beep) is heard, the information was success- fully stored in the next empty memory bin in the Caller ID Table. If an error tone (three short beeps) is heard:
-the system does not allow the extension to edit the table (Program 61 [C.]).
-the call does not have Caller ID infor- mation available
-another extension is storing informa- tion simultaneously
-the Caller ID Table is full
To store new informa- tion or edit existing information:
1.Do not lift handset.
2.Press 
.
3.Dial 
for a specific bin number then enter bin number
OR 
for the next available bin number.
4.Press 
.
5.Enter telephone number.
6.Press 
.
7.Enter caller’s name (see the Name/Message Storing feature).
8.Press 
.
9.Press 
.
18