Programmable Settings
Telephone settings
Dialing mode
If you cannot make calls, change this setting depending on your telephone line service.
“Tone” (default): For tone dial service.
“Pulse”: For rotary pulse dial service.
1Press {MENU}.
2Scroll to “Initial setting” by pressing {V} or {^}, then press {>}.
3Scroll to “Set tel line” by pressing {V} or {^}, then press {>}.
4Scroll to “Set dial mode” by pressing {V} or {^}, then press {>}.
5Press {V} or {^} repeatedly to select the desired setting.
6Press {Save}, then press {OFF}.
Flash time
The flash time depends on your telephone exchange or host PBX.
You can select: “90ms” (milliseconds), “100ms”, “110ms”, “250ms”, “300ms”, “400ms”, “600ms”, or “700ms” (default).
1Press {MENU}.
2Scroll to “Initial setting” by pressing {V} or {^}, then press {>}.
3Scroll to “Set tel line” by pressing {V} or {^}, then press {>}.
4Scroll to “Set flash time” by pressing {V} or {^}, then press {>}.
5Press {V} or {^} repeatedly to select the desired setting.
6Press {Save}, then press {OFF}.
Note:
LThe setting should stay at 700 ms unless pressing {Flash} fails to pick up the Call Waiting call.
LIf the unit is connected via a PBX, certain PBX functions (call transferring, etc.) may not work correctly. Consult your PBX supplier for the correct setting.
Line mode
The line mode is preset to “B” and generally should not be adjusted. If “Line in use” on the handset is not displayed properly, the line mode selection is incorrect. Set line mode to “A”.
1Press {MENU}.
2Scroll to “Initial setting” by pressing {V} or {^}, then press {>}.
3 Scroll to “Set tel line” by pressing {V} or {^}, then press {>}.
4Scroll to “Set line mode” by pressing {V} or {^}, then press {>}.
5Press {V} or {^} repeatedly to select the desired setting.
6Press {Save}, then press {OFF}.
For assistance, please call | 39 |