Useful Information
Wall mounting
Base unit
1Insert the hooks on the wall mounting adaptor into the holes 1 and 2 on the base unit.
2
1
12
2While pressing down the lever (A), press it in the direction of the arrow (B) until it is secure.
A
B
3Tuck the telephone line cord inside the wall mounting adaptor and connect the cord. Mount the unit by inserting the mounting pins into the round openings on the adaptor (for pin 2, use round cut out at the bottom of the adaptor if you are using the 4 inches phone plate), then sliding the unit down to secure it. Connect the AC adaptor to power outlet (page 9).
LThere are two common types of wall phone plates. The distance between 1 and 2 may vary depending on the size of the wall phone plate installed.
AC adaptor cord |
1 |
83 mm
(3 1/4 inches) or
102 mm (4 inches)
2
(120 V AC,
60 Hz)
83 mm |
| 102 mm |
(3 1/4 inches) | 1 | (4 inches) |
|
| |
| 2 |
|
40For assistance, please visit http://www.panasonic.com/help