Preparation
Setting the unit before use
Important:
LTo program features by scrolling through the display menus, see page 24.
Display language
You can select either “English” or “Español” as the display language. The default setting is “English”.
1
{MENU} i{0}{8}
{MENU} i{0}{8}{1}
2{V}/{^}: Select the desired setting.
3Press the right soft key to save. i
{OFF}
Voice guidance language
Available model:
You can select either “English” or “Español” as the voice guidance language of the answering system. The default setting is “English”.
1{MENU} i{0}{8}{2}
2{V}/{^}: Select the desired setting.
3{Save} i{OFF}
Dialing mode
If you cannot make calls, change this setting according to your telephone line service. The default setting is “Tone”. “Tone”: For tone dial service. “Pulse”: For rotary/pulse dial service.
1{MENU} i{0}{5}{1}
2{V}/{^}: Select the desired setting.
3{Save} i{OFF}
Date and time
Set the correct date and time.
–To use the available alarm function (page 28).
–When you play back a message from the answering system (page 31), the unit announces the day and time it was recorded.
1{MENU} i{4}{1}
2Enter the current month, day, and year by selecting 2 digits for each. Example: August 15, 2007
{0}{8} {1}{5} {0}{7}
3Enter the current hour and minute
Example: 9:30
{0}{9} {3}{0}
4{AM/PM}: Select “AM” or “PM”.
5{Save} i{OFF}
Note:
LIf you make a mistake when entering the date and time, press {<}, {>}, {^}, or {V} to move the cursor, then make the correction.
LThe date and time may be incorrect after a power failure. In this case, set the date and time again.
14For assistance, please visit http://www.panasonic.com/help