Voice Mail Service
Listening to Voice Mail messages
The unit lets you know that you have new Voice Mail messages in the following ways:
–“New Voice Mail” is displayed on the handset.
–The message indicator on the handset flashes slowly if message alert feature is turned on (page 37).
1Press {C}, then press {VM} within 15 seconds.
OR
{MENU} i{V}/{^}: “V.M. access” i{Select}
LThe speakerphone turns on.
2Follow the prerecorded instructions.
3When finished, press {OFF}.
Note:
LIf {VM} is not displayed, the Voice Mail access number has not been stored. Store the number (page 36).
LIf the handset still indicates there are new messages even after you have listened to all new messages, turn it off by pressing and holding {OFF} until the handset beeps.
LIf your Voice Mail service uses Voice Mail tones and the message is over 3 minutes long, the handset may not indicate new messages.
LIf your Voice Mail service uses Voice Mail tones, the tones are heard from any phone connected to the same line. If you want to use another phone to listen to Voice Mail messages, you have to dial your access number manually.
Message alert
You can select whether or not the message indicator on the handset flashes slowly when there are new recorded messages in the Voice Mail system.
The default setting is “Off”.
Important:
L
If there are new answering system messages present (page 30), the message indicator also flashes slowly.
1{MENU} i{0}{#}
2{V}/{^}: Select the desired setting.
3{Save} i{OFF}
Note:
LWhile message alert is on, battery operating time is shortened (page 11).
For assistance, please visit http://www.panasonic.com/help | 37 |