Voice Mail Service
Turning VM tone detection on/off The default setting is “On”.
1{MENU} (center of joystick) i
{#}{3}{3}{2}
2{V}/{^}: Select the desired setting. i{SAVE} i{OFF}
Listening to voice mail messages
The unit lets you know that you have new voice mail messages in the following ways:
–“New Voice Mail” is displayed on the handset if message indication service is available.
–The message indicator on the handset flashes slowly if message alert feature is turned on (“Message alert”, page 35).
1Press {C}, then press {VM} within 15 seconds.
OR
{MENU} (center of joystick) i
{#}{3}{3}{0}
L The speakerphone turns on.
2Follow the
3When finished, press {OFF}.
Note:
LIf {VM} is not displayed, the voice mail access number has not been stored. Store the number (page 36).
L If the handset still indicates there are new messages even after you have listened to all new messages, turn it off by pressing and holding {OFF} until the handset beeps.
L If your voice mail service uses voice mail tones and a message is over 3 minutes long, the handset may not indicate new messages.
L If your voice mail service uses voice mail tones, the tones are heard from any phone connected to the same line. If you want to use another phone to listen to voice mail messages, you have to dial your access number manually.
For assistance, please visit http://www.panasonic.com/help | 37 |