Panasonic KX-TG7433, KX-TG7432, KX-TG7434, KX-TG7431 Error messages, Display message Cause/solution

Page 40

Useful Information

Error messages

If the unit detects a problem, one of the following messages is shown on the display.

Display message	Cause/solution
Busy	L The called unit is in use.
or	L Other units are in use and the system is busy.
or	Try again later.
System busy. Try again	L The handset you are using is too far from the
System busy. Try again	base unit. Move closer and try again.
later.	L The handset’s registration may have been
	canceled. Re-register the handset (page 26).
Check tel line	L The supplied telephone line cord has not been
	connected yet or not connected properly.
	Check the connections (page 8).
Use rechargeable	L A wrong type of battery such as Alkaline or
battery.	Manganese was inserted. Use only the
	rechargeable Ni-MH batteries noted on page
	4, 6.
Error!!	L The handset’s registration has failed. Move
	the handset and base unit away from all
	electrical appliances and try again.
Invalid	L There is no handset registered to the base
	unit matching the handset number you
	entered.
	L The handset is not registered to the base unit.
	Register the handset (page 26).
No link to base.	L The handset has lost communication with the
Reconnect main base AC	base unit. Move closer to the base unit and try
adaptor.	again.
	L Unplug the base unit’s AC adaptor to reset the
	unit. Reconnect the adaptor and try again.
	L The handset’s registration may have been
	canceled. Re-register the handset (page 26).
Requires subscription	L You must subscribe to a Caller ID service.
to Caller ID.	Once you receive caller information after
	subscribing to a Caller ID service, this
	message will not be displayed.
Store V.M. no.	L You have not stored the voice mail access
	number. Store the number (page 36).

40For assistance, please visit http://www.panasonic.com/help

Image 40

Contents Operating Instructions Caller ID Service Voice Mail ServiceIntroduction Important InformationAccessory information Supplied accessoriesModel composition KX-TGAdditional/replacement accessories Accessory item Order numberOptional handset feature overview Feature Expanding your phone systemFor your safety Important safety instructions Specifications Setting up Battery installationBattery charge ConnectionsBattery level Icon During a power failureOperation Operating time Handset ControlsBase unit Temporary switch of the display mode Icon FeatureDisplay Handset display items MeaningInitial settings Dialing modeDisplay language Voice guidance languageAnswering calls Making callsRedial Useful features during a call HoldMute FlashHandset clarity booster Temporary tone dialing for rotary/pulse service usersCall share Shared phonebook Adding entriesFinding and calling a phonebook entry SelectEditing entries Erasing entriesChain dial OFFProgramming by scrolling through the display menus Programmable settingsMain menu Sub-menu Talking CallerID Programming using the direct commands Feature Setting code System CodePre-recorded Time adjust*10 Silent mode AlarmSpecial programming SaveStoring unwanted callers Call block Caller ID subscribers onlyFrom the caller list Display mode ClearRegistering a unit Operating additional unitsRegistering a handset to a base unit Additional handsetsUsing Caller ID service Caller ID featuresTalking Caller ID Missed callsCaller ID number auto edit feature Caller listRinger ID Viewing the caller list and calling backErasing selected caller information Erasing all caller informationStoring caller information to the phonebook Select iOFFAnswering system Turning the answering system on/offMemory capacity Call screeningListening to messages using the base unit Greeting messageListening to messages using the handset Erasing all messagesListening to messages from the message list PlayRemote access code Using the answering system remotelyRemote operation Calling back Caller ID subscribers onlyAnswering system settings Remote commandsWhen the Spanish voice guidance is selected Turning on the answering system remotelyCaller’s recording time For voice mail service subscribersMessage alert Voice mail service Storing the voice mail VM access numberTo erase the voice mail access number Voice mail VM tone detectionTurning VM tone detection on/off The default setting is On Listening to voice mail messagesIntercom Handset locatorTransferring calls, conference calls Making an intercom callWall mounting Belt clipTo attach Error messages Display message Cause/solutionGeneral use Problem Cause/solution TroubleshootingProgrammable settings Problem Cause/solution Battery recharge Problem Cause/solution Problem Cause/solutionMaking/answering calls, intercom Caller ID/Talking Caller ID Problem Cause/solution Answering system Problem Cause/solution Liquid damage Problem Cause/solution FCC and other information FCC RF Exposure Warning Correcto Guía Rápida EspañolaIncorrecto Teclas de función JoystickCambio temporal del modo de pantalla Idioma de la pantalla Idioma de la guía de vozPara grabar su propio mensaje Mensaje marcador Contestador de llamadas Unidad basePreguntas frecuentes Solución rápida de problemas 1El auricular muestra2El auricular no emite ningún tono de marcación Hablar apareceCómo registrar un auricular a una unidad base Or, contact us via the web at Customer servicesTTY users hearing or speech impaired users can call Warranty For United States and Puerto Rico Ship-In ServicePanasonic Consumer Electronics Company Parts Labor One 1 YearLimited Warranty Limits And Exclusions Index Read these Operating Instructions Call us at 1-800-211-PANAFor your future reference Attach your purchase receipt here