
Getting Started
Initial settings
n Direct command code:
Programmable settings can be accessed by pressing MMENUN, #, and then the corresponding code on the dial keypad (page 36).
Example: Press MMENUN#101. n Symbol meaning:
Example: MbN: “Off”
Press MCN or MDN to select the words in quotations.
Date and time
Important:
RWhen you install the batteries for the first time, the handset may prompt you to set date and time. First press MSELECTN, then proceed to step 2.
Handset
1MMENUN#101
2Enter the current month, date, and year by selecting 2 digits for each. Example: July 15, 2013
07 15 13
3MOKN
4Enter the current hour and minute
Example: 9:30 09 30
5*: Select “AM” or “PM”.
6 MSAVEN a MOFFN
Note:
RWhen English is selected as the display language,
RThe date and time may be incorrect after a power failure. In this case, set the date and time again.
Display language
You can select either “English” or
“Español” as the display language. The default setting is “English”.
Handset / Base unit
1MMENUN#110
2MbN: Select the desired setting. a
MSAVEN
3Proceed with the operation for your unit. Handset: MOFFN
Base unit: MEXITN
Voice guidance language
You can select either “English” or
“Español” as the voice guidance language of the answering system. The default setting is “English”.
Handset
1MMENUN#112
2MbN: Select the desired setting.
3 MSAVEN a MOFFN
Dialing mode
If you cannot make calls, change this setting according to your telephone line service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
Handset
1MMENUN#120
2MbN: Select the desired setting.
3 MSAVEN a MOFFN
16For assistance, please visit http://www.panasonic.com/help