Panasonic KXTG7872S Call block *1, First ring*1 On Off, Block w/o num*1, *2 On Off, Español

Programming

Sub-menu 1	Sub-menu 2	Settings	Code
Call block*1	–	–	#217	45

		First ring*1	<On> Off	#173	46
		Block w/o num*1, *2	On <Off>	#240	46
		(Block calls without phone
		number)
LCD contrast		–	Level 1–6 <3>	#145		–
(Display contrast)
Caller ID edit		–	<On> Off	#214	50
(Caller ID number auto
edit)
Change language		–	<English>	#110	16
(Display)			Español
Main menu:	“Cust. Support”

Operation

Displaying customer support Web address.

Code

#680

–

*1	If you program these settings using one of the units, you do not need to program the same
	item using another unit.
*2	This menu is not displayed when scrolling through the display menus. It is only available in
	direct command code.
*3	When the cellular line only mode is turned on, these menus are not displayed (page 19).
*4	After the Bluetooth device is paired, the device name is displayed.
*5	For CELL 1
*6	For CELL 2
*7	If you select one of the melody ringer tones, it will continue to play for several seconds even
	if the caller has already hung up. You may either hear a dial tone or no one on the line when
	you answer the call.
*8	The preset melodies in this product are used with permission of © 2009 Copyrights Vision
	Inc.
*9	This feature allows the unit to automatically adjust the date and time each time caller
	information including date and time is received.
	To turn this feature on, select “Caller ID auto”. To turn this feature off, select
	“Manual”. (Caller ID subscribers only)
	To use this feature, set the date and time first (page 16).
*10	If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to
	3). If you select a melody, you cannot distinguish lines by their ringers.
*11	This tone lets you know when you receive an outside call while you are on another line or an
	intercom call. If you select “On”, the tone sounds 2 times.
*12	This setting is available when you have the key detector (KX-TGA20). Read the installation
	guide for more information on the key detector.
*13	For models with supplied key detectors, the display shows "1: Detector1".
*14	If you register 2 or more key detectors.
*15	If you have 2 or more key detectors.
*16	Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any
	keys, including confirmation tones and error tones.
	For assistance, please visit http://www.panasonic.com/help	43