Panasonic KX-TG7341BX Connections, Battery installation and replacement, During a power failure

TG7331-7341BX(e).book Page 12 Wednesday, August 20, 2008 10:31 AM

Preparation

Connections

Connect the AC adaptor cord (A) by pressing the plug firmly (B). Connect the telephone line cord until it clicks into the base unit and telephone line jack (C).

Base unit

L Use only the supplied Panasonic AC adaptor PQLV207BX.

L Use only the supplied telephone line cord. Using another telephone line cord may not allow the unit to work properly.

the same telephone line jack using a T- adaptor.

If you subscribe to a DSL/ADSL service

Please attach a DSL/ADSL filter (contact your DSL/ADSL provider) to the telephone line between the base unit and the telephone line jack in the event of the following:

–noise is heard during conversations.

–Caller ID features do not function properly.

To

telephone line

To telephone line

(220–240 V AC, 50/60 Hz)

Hook

DSL/ADSL filter

Battery installation and replacement

Important:

Note:

L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

L The AC adaptor should be connected to a vertically oriented or floor- mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

During a power failure

The unit will not work during a power failure. We recommend connecting a corded-type telephone (without AC adaptor) to the same telephone line or to

L Use the supplied rechargeable batteries (Part No. HHR-55AAAB).

L When installing the batteries:

–Wipe the battery ends (S, T) with a dry cloth.

–Avoid touching the battery ends (S, T) or the unit contacts.

–Confirm correct polarities (S, T). L When replacing the batteries:

–USE ONLY rechargeable Ni-MH batteries AAA (R03) size.

–Do NOT use Alkaline/Manganese/ Ni-Cd batteries.

12