Panasonic KX-TG5240AL operating instructions 3334444, Low High, Making Calls

Page 30

TG5240AL.fm Page 30 Friday, June 11, 2004 5:22 PM

Making Calls

To dial after confirming the entered number

1. Enter a phone number.

3334444

If you misdial, press the soft key ( CLEAR ). Enter the correct phone number.

If a pause is required when dialling, press the soft key ( PAUSE ) where needed (p. 58).

To cancel, press [OFF].

2.Press [C] or [s].

3.To hang up, press [OFF] or place the handset on the base unit.

To adjust the receiver/ speaker volume during a conversation

There are 3 volume levels for the receiver and 6 volume levels for the speaker.

To increase volume, press [B]. To decrease volume, press [d].

Ex. Receiver volume: High

Speaker volume: Level 6

Volume

Low High

dB

The display shows the current volume setting.

If you try to increase/decrease volume when it is at the maximum/minimum level, the handset will beep 3 times.

To redial the last number dialled

Press [C] or [s], then press [REDIAL].

To redial using the redial list (Memory Redial)

The last 5 phone numbers dialled are stored in the redial list.

1.Press [REDIAL].

The last number dialled is displayed.

2.Scroll to the desired number by pressing [d] or [B].

You can also scroll down through the list by pressing [REDIAL].

To exit the list, press [OFF].

3.Press [C] or [s].

To erase an item, scroll to the item then press the soft key ( ERASE ).

If “No items stored” is displayed, the list is empty.

To put a call on hold

1.Press [HOLD/INTERCOM] during a conversation.

Press extension# to transfer” is displayed.

To transfer the call to the base unit or another handset, see page 52; to transfer to a mailbox, see page 72.

2.Press [HOLD/INTERCOM] again.

Hold” is displayed.

To return to the call, press [C] or [s].

The base unit user can also take the call by pressing [SP-PHONE].

Another handset user can also take the call by pressing [C] or [s].

If another phone is connected on the same line (p. 12), you can also take the call by lifting its handset.

If a call is kept on hold for 6 minutes, an alarm tone will start to sound and the Ringer/Message Alert indicator will start to flash rapidly. After 4 additional minutes on hold, the call will be disconnected.

30

Image 30
Contents Charge the battery for 6 hours before initial use GHz Expandable Cordless Answering SystemAccessories included For your future referenceExpanding Your Phone KX-TG5240AL KX-TGA520ALContents Contents Battery charge For Best PerformanceBase unit location/Noise Erase Button Location of ControlsBase unit Greeting Check Button pOFF Button p Location of ControlsHandset Menu Button pHandset navigator key How to use the soft keys/navigator keysHandset soft keys Base unit navigator keyDisplays Missed callsDisplays PreparationInstallation ConnectionsBattery strength Installation Installing the Battery in the HandsetBattery Charge To replace the batteryBattery information Recharge batteryInstallation RechargeHow to select a function item from the menu Programmable SettingsRinger setting Programming Guidelines HandsetProgrammable Settings Function Menu Table Handset TalkProgrammable Settings Date and Time Handset For Caller ID service users pTo confirm the date and time, repeat steps 1 and 2 above Ringer setting Programmable Settings Ringer VolumeHandset ringer volume Handset Off ?1Tone Programmable SettingsBase unit ringer volume Base Unit Ringer ToneInitial setting Selecting the base unit ringer tone by using the HandsetLow Programmable Settings Auto Talk HandsetOff LCD Contrast HandsetTo erase your area code Programmable Settings Storing Your Area Code HandsetTo store your area code Scroll to Set area code by pressing dProgrammable Settings Line Mode Handset Dialling Mode HandsetTone To record a greeting message Preparing the Answering SystemGreeting Message Base Unit Greeting message samplesTo erase the greeting Preparing the Answering SystemTo review the greeting Pre-recorded greetingPress the soft key At Set 3minRecording time Scroll to Recording time by pressingSelect the number of rings by pressing d Preparing the Answering System Number of Rings HandsetNumber of rings Toll saverSelect the recording mode by pressing d or Preparing the Answering System Recording Mode HandsetRecording mode Message Alert HandsetTo have a hands-free phone conversation Using the Handset HandsetMaking Calls System capabilities Operating more than one handset, p3334444 Low HighMaking Calls Clarity Booster To turn this feature on, press the soft keyVoice Enhancer Technology Backlit LCD display/Lighted handset keypadPress SP-PHONE Making Calls Using the Base Unit Base UnitTo adjust the speaker volume during a conversation Press SP-PHONE, then press REDIAL/PAUSEAnswering Calls Auto TalkTalk into the MIC To hang up, press SP-PHONE How Caller ID information is displayed Caller ID Service0555222333 Private name displayCaller ID Service Talking Caller ID Handset Base Unit Announcing caller information Talking Caller IDHandset Talking Caller ID feature Handset Caller ID ServiceTo turn on or off Talking Caller ID feature Base unit Talking Caller ID feature HandsetUsing the Caller List Viewing the Caller List Handset0555456789 Using the Caller List05553334441 Calling Back from the Caller List HandsetAdd or erase digits to the beginning Number as desiredTo make a call to the edited number, press C or s Press the soft key C I D Or B to enter the Caller List To erase a specific callerTo erase all entries Press the soft key YESStoring Names and Numbers Handset Phone BookTom To store an emergency numberIf you make a mistake while entering a name or number Phone BookSelecting characters to enter names For example, to enter TomFrank To search for a name by initialIndex table Press the soft key Select at 1=Phone book, or press Phone Book Chain Dial HandsetWhile you are on a call Press Menu Search for the desired item by pressing d or BErase? Jane5456789 ErasedTo copy one phone book item to another handset Copy phone bookTom Jones Copy all itemsScroll to Copy all items by pressing d Dialling a Stored Phone Number Base Unit Speed DiallerStoring Phone Numbers Base Unit To erase a stored numberPress HOLD/INTERCOM IntercomMaking Intercom Calls Press LOCATOR/INTERCOM/TRANSFERIntercom Call from BaseCall from HS2 Answering Intercom CallsWhen finished, press SP-PHONE or LOCATOR/INTERCOM/ Transfer Intercom Voice Paging Base UnitTo make a voice announcement to all handsets, press During a call, press LOCATOR/INTERCOM/TRANSFER Transferring a CallHandset To complete the transfer, press OFF Handset Press C, s, or HOLD/INTERCOM to answerFrom a Handset to another Handset When the system has two or more handsetsTransferring a Call To complete the transfer, press OFFQuick call transfer Conference Calls Call ShareTo join a conversation Call Share To turn Room Monitor on for the base unit Handset Room MonitorTo turn Room Monitor on for the handset Handset Scroll to Room monitor by pressing d orTo monitor with Base Unit Room MonitorTo monitor with Handset To end monitoring, press OFFMuting Your Conversation Special FeaturesTo turn on the Call Privacy feature Call Privacy HandsetKey tone Special Features Key Tone HandsetUsing Caller ID Type Scroll to Key tone by pressing d or BSelecting the recall time Handset Special Features100ms Set recall timeBase unit incoming call tone Handset Special Features Incoming Call Tone Handset Base UnitHandset incoming call tone Handset Incoming callTo turn the dial lock on Handset 1234On? Turn Dial lockTo turn the dial lock off Handset Enter the password set when the dial lockOff? Was turned on Press the soft keyMailbox Features When someone callsUseful information Enter a 2-digit password Mailbox Features Setting the Mailbox Password for Mailbox 2To erase the password To confirm the password, repeat steps 1 toAutomatic Answering Operation Setting the Unit to Answer Calls Base UnitTo turn the incoming call monitoring feature off Monitoring Incoming Calls Base UnitTo play back messages When Mailbox 2 or 3 has a passwordListening to Messages Press Mailbox 2 or MailboxRemote operation Press the soft key BOX 1 , BOX 2 , or BOXTo end remote operation, press OFF Listening to Messages Voice menuErasing all messages in the mailbox Erasing MessagesErasing a specific message Press Erase while the base unit is not being usedPress Memo When finished, press Memo or StopRecording a Memo Message After the long beep, talk clearly 20 cm away from the MICTransferring a Call to a Mailbox Press 9 to hang up the callInterrupting remote operation Remote Operation from a Touch Tone Phone Summary of remote operationScroll to Remote code by pressing d or Enter a 2-digit remote codeTo confirm the remote code, repeat steps 1 to Remote Operation from a Touch Tone Phone Voice Menu Shaded parts are voice promptsDirect commands Turning on the Answering SystemSkipping the greeting Belt Clip Connecting the optional headsetTo switch to the speakerphone while using the headset Optional HeadsetWall Mounting Connect the AC adaptorWall Mounting Wall TemplateTo remove the wall mounting adaptor Direct Commands Menu item Command Selection items2-7 2-7 rings Direct Commands During programmingTo exit programming, press OFF Deregistration Cancelling Registration/Re-registrationCancelling the Handset Registration Handset DeregisteredRegistration Press and hold LOCATOR/INTERCOM/TRANSFER for 3 secondsInvalid Cancelling Registration/Re-registrationBusy Display message Cause & RemedyIf the Following Appear on Your Display Phone book fullNo items stored Denied Dial lockedTroubleshooting Problem Cause & RemedyTelephone System Troubleshooting You need to subscribe to Caller ID Problem Answering SystemBase unit ringer volume High Base unit ringer tone Tone General Safety Instructions Safety Instructions Installation Important InformationInstructions to customer Service difficulties Important InformationSpecifications TG5240AL.fm Page 99 Friday, June 11, 2004 522 PM 62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan Sales Department Panasonic Australia Pty. LimitedManufacturer PQQX14275YA S0504-1064