Intercom features between handsets
Intercom calls
Intercom calls can be made between handsets.
Note:
L If you receive an outside call while talking on the intercom, the interrupt tone sounds. To answer the call, press {TEL} or {IP}. To turn the interrupt tone off, see page 50.
L When paging, the paged handset beeps for 1 minute.
Making an intercom call
1{INTERCOM}
2To page a handset, enter its extension number ({1} – {8}). L To stop paging, press {OFF}.
3When you finish talking, press
{OFF}.
Answering an intercom call
1Press {TALK} to answer the page.
2When you finish talking, press
{OFF}.
Note:
L The ringer volume for intercom calls follows the higher volume level of the 2 lines (page 51).
LWhen the ringer volume is set to off for both lines, the handset rings at a low level for intercom calls.
Transferring calls, conference calls
Outside calls can be transferred between 2 handsets. 2 handsets can
4To complete the transfer: Press {OFF}.
L The outside call is being routed to the handset.
To make a conference call: Press {CONF}.
L To leave the conference, press {OFF}. The other 2 parties can continue the conversation.
L To put the outside call on hold, press {HOLD}. To resume the conference, press {CONF}.
Answering a transferred call Press {TALK} to answer the page.
L After the paging party disconnects, you can talk to the outside caller.
Auto intercom/Room monitor
This feature allows you to:
–answer an intercom call without pressing any buttons on the handset.
–listen to the sound in a room where the handset is located.
Turning auto intercom on/off
“Off” (Default): Turns this feature off.
“On (Ringer On)”: When an intercom call is received, the handset rings 2 times then the speakerphone is automatically turned on.
“On (Ringer Off)”: When an intercom call is received, the handset
For product assistance, visit www.panasonic.com/help | 67 |
For Aassistance, visit www.joip.com |
|