Intercom Features
does not ring and the speakerphone is automatically turned on. This allows you to easily monitor a baby’s room, for example, from different areas of the house.
1{MENU} i{#}{2}{7}{3}
2{V}/{^}: Select the desired setting.
3{SAVE} i{OFF}
Note:
L Auto intercom cannot be used when:
–your handset is receiving a transferred outside call.
–all handsets are being paged by the base unit.
Answering an intercom call using auto intercom
1When you are paged by another handset, speak into the microphone.
L To switch to the receiver, press
{s}.
2To end the intercom, press {OFF}.
Monitoring audio in a room
You can listen to the sound in a room where another handset is located.
Important:
L Before using this feature, set auto intercom on the destination handset to “On (Ringer Off)” to allow access by other handsets.
1Call the destination handset (page 67).
L You can listen to the audio.
2To mute your sound output, press {MUTE} if necessary.
3Press {OFF} to stop monitoring.
Intercom features between the handset and base unit
Available model:
Intercom calls
Intercom calls can be made between the handset and base unit.
Note:
L If you receive an outside call while talking on the intercom, the interrupt tone sounds. To answer the call, press {TEL} or {IP}. To turn the interrupt tone off, see page 50.
L When paging unit(s) for an intercom
call, the paged unit(s) beeps for 1 minute.
Making an intercom call
Handset
1{INTERCOM}
2To page the base unit, press {0}. L To stop paging, press {OFF}.
3When you finish talking, press
{OFF}.
Base unit
1{INTERCOM}
2To page a specific handset, enter its extension number ({1} – {8}).
To page all handsets, press {0} or wait for a few seconds.
L The paged handset(s) beeps for 1 minute.
L To stop paging, press
{INTERCOM}.
68For product assistance, visit www.panasonic.com/help
For Aassistance, visit www.joip.com