Panasonic WX-CC411, WX-CC412 QqConfiguring network settings Network, IPv4 Network, Web server

Page 12

Browser Operation

qqConfiguring network settings [Network]

This function is used to configure the network settings of the Center Module.

Click the [Installation] button, then the [Network] tab.

IPv4 Network

[DHCP / Static]

Displays the DHCP of the Center Module. This setting can be changed through operations on the Center Module. DHCP: Operating with the DHCP setting ON.

Static: Operating with the DHCP setting OFF (static IP address).

[MAC address]

Displays the MAC address of the Center Module.

[IP address]

Displays the IP address of the Center Module. This setting can be changed through operations on the Center Module.

[Subnet mask]

Displays the subnet mask of the Center Module. This setting can be changed through operations on the Center Module.

[Default gateway]

Displays the default gateway of the Center Module. This setting can be changed through operations on the Center Module.

[DNS Auto / Manual]

Set whether to retrieve the DNS server address automatically (“Auto”) or input it manually (“Manual”). When set to “Manual”, the DNS setting must be configured. When using the DHCP function, if “DNS” is set to “Auto”, the DNS server address will be retrieved automatically. Inquire with the system administrator for questions about settings. Default setting: Manual

[Primary DNS server address], [Secondary DNS server address]

If “DNS” is set to “Manual”, the IP address of the DNS server must be entered manually.

Inquire with the system administrator for questions about the DNS server IP address.

Default setting: None (blank)

[Line speed]

Displays the network transmission rate setting of the Center Module. This setting can be changed through operations on the Center Module.

Web server

[Connection]

Select the method for connecting to the Center Module. HTTP: Can only connect by HTTP.

HTTPS: Can only connect by HTTPS.

Default setting: HTTP

[HTTP port]

Set the port number to be used in HTTP.

Settable port numbers: 1 to 65535

Default setting: 80

[HTTPS port]

Set the port number to be used in HTTPS.

Settable port numbers: 1 to 65535

Default setting: 443

Important

ppIf Web server settings are altered, the Center Module

will restart automatically.

ppIf HTTPS is selected, the Center Module will automatically generate an SSL server certificate. This

is only compatible with SSL self-certification.

ppThe following port numbers cannot be used. (Excluding the port number set in the default settings.) 20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Operating Instructions Browser Guide Contents WwFeatures WwSystem diagramBefore use WwPrefaceWwOperation Single laneDual lane WwConcerning the Operating Instructions Tandem laneWwSystem requirements WwTrademarks and registered trademarksWwAbbreviations Operating precautions WwRouterWwBrowser Refresh Rate WwBrowser CompatibilityNetwork WwExamples of connectionsWwNetwork Security QqDirect connection to the PCWwConnecting the Center Module via a PC WwSetup InstructionsBrowser Operation WwSetup Menu Setup menuWwOperation Screen WwConfiguring and Confirming Settings at Installation MaintenanceQqConfirming the date and time setting Date & time NTP/ Time zoneQqConfiguring network settings Network IPv4 NetworkWeb server QqConfiguring server settings Server UPnPTime adjustment interval time Authentication Pp TypePp User password NTP server addressQqSetting Network Cameras connected to the unit Camera Camera 1 toQqSetting Help contact Help contact Configuring Help contact email transmission settingsQqSetting Site information Site info WwConfirming store settings QqConfirming nighttime volume settings Nighttime volumeNighttime volume Level -20 to 0 dBQqConfirming store hours Store hours Store hoursClosed message Holiday messageInput volume Output volumeAux speaker Device for LineWwConfirming message settings QqConfirming greeter message settings Greeter messageMessage list Schedule listQqConfirming reminder message settings Reminder message Pp GroupPp AUX Start Ending time IntervalInterval time QqConfirming alert message settings Alert message Destination Pp GroupWwConfirming the security alert settings List of alertsMail for Alert * * 1 to Remaining capacityWwConfirming quick operation settings WwBacking up settingsLane a setting Lane B setting WX‑CC412 only WwPerforming maintenance on Center Module QqChecking the Center Module StatusPp Port number Pp StatusReboot Message Meaning ActionQqRetrieving log data Log Delete checkboxFile column Lane columnQqConfirming the software version Update QqSetting authentication User mngUser ID change Password change Old passwordNew password Confirm new passwordWwChecking the status of All-In One Headsets and Belt Packs Information display menuWwChecking the status of alerts QqChecking the status of security alerts Security alertQqChecking the status of system alerts System alert Troubleshooting Pp Is default gateway set for the network? Pp Is port forwarding set for the router?Center Module cannot be Pp Has an SD card been inserted?F0114-0 PGQP1741ZA
Top Page Image Contents