Panasonic WX-CC412 QqConfirming the software version Update, QqSetting authentication User mng

Page 31

Browser Operation

qqConfirming the software version [Update]

This tab is used to confirm the software version. Software version updates can also be performed from this screen. Click the [Maintenance] button, then the [Update] tab.

[System version]

Displays the system version.

[CPU version]

Displays the CPU version.

[BBIC version]

Displays the BBIC version.

[DSP version]

Displays the DSP version.

[Execute] button

This button is used to update the version of the Center Module software.

qqSetting authentication [User mng.]

This tab is used to set authentication for accessing the Center Module from a browser.

Click the [Maintenance] button, then the [User mng.] tab.

[Authentication]

This pull-down menu is used to set the authentication type for user authentication.

Digest or Basic : Use digest authentication or basic

	authentication.
Digest:	Use digest authentication.
Basic:	Use basic authentication.

Default setting: Digest or Basic

Note

ppAfter changing [Authentication] settings, close the web browser and re-access the Center Module.

User ID change

[New user ID]

Displays the current user ID. To change the user ID, input a new username.

Number of characters: 4 to 32

Types of characters: alphanumeric, characters !#$%'()=˜¦`{}<>?_-^[]/@*,.+*

31

Image 31

Contents Operating Instructions Browser Guide Contents WwPreface WwFeaturesWwSystem diagram Before useSingle lane WwOperationDual lane Tandem lane WwConcerning the Operating InstructionsWwTrademarks and registered trademarks WwSystem requirementsWwAbbreviations WwBrowser Compatibility Operating precautionsWwRouter WwBrowser Refresh RateQqDirect connection to the PC NetworkWwExamples of connections WwNetwork SecurityWwSetup Instructions WwConnecting the Center Module via a PCBrowser Operation Setup menu WwSetup MenuWwOperation Screen NTP/ Time zone WwConfiguring and Confirming Settings at InstallationMaintenance QqConfirming the date and time setting Date & timeIPv4 Network QqConfiguring network settings NetworkWeb server UPnP QqConfiguring server settings ServerNTP server address Time adjustment interval timeAuthentication Pp Type Pp User passwordCamera 1 to QqSetting Network Cameras connected to the unit CameraConfiguring Help contact email transmission settings QqSetting Help contact Help contactQqSetting Site information Site info Level -20 to 0 dB WwConfirming store settingsQqConfirming nighttime volume settings Nighttime volume Nighttime volumeHoliday message QqConfirming store hours Store hoursStore hours Closed messageDevice for Line Input volumeOutput volume Aux speakerQqConfirming greeter message settings Greeter message WwConfirming message settingsSchedule list Message listPp Group QqConfirming reminder message settings Reminder messagePp AUX Interval Start Ending timeInterval time Destination Pp Group QqConfirming alert message settings Alert messageList of alerts WwConfirming the security alert settingsRemaining capacity Mail for Alert * * 1 toWwBacking up settings WwConfirming quick operation settingsLane a setting Lane B setting WX‑CC412 only Pp Status WwPerforming maintenance on Center Module QqChecking the Center Module Status Pp Port numberMessage Meaning Action RebootLane column QqRetrieving log data LogDelete checkbox File columnQqSetting authentication User mng QqConfirming the software version UpdateUser ID change Confirm new password Password changeOld password New passwordQqChecking the status of security alerts Security alert WwChecking the status of All-In One Headsets and Belt PacksInformation display menu WwChecking the status of alertsQqChecking the status of system alerts System alert Troubleshooting Pp Has an SD card been inserted? Pp Is default gateway set for the network?Pp Is port forwarding set for the router? Center Module cannot beF0114-0 PGQP1741ZA