Panasonic WX-CC411, WX-CC412 operating instructions Mail for Alert * * 1 to, Remaining capacity

Browser Operation

Note

ppThe SMTP server must be set before an email can be

sent. To set the SMTP server, click the [Installation] button, then the [Server] tab.

ppThe following substitute characters can be used in the email body. The substitute characters will be replaced with the corresponding character string when the email is sent.

Substitute	Character string after substitution
characters
%d%	Date of alert
	e.g. 05
%M%	Month of alert (alphabetical character)
	e.g. Feb
%m%	Month of alert (numerical character)
	e.g. 02
%Y%	Year of alert (four-digit)
	e.g. 2014
%y%	Year of alert (the last two digits)
	e.g. 14
%t%	Time of alert
	e.g. 15:00:00
%a%	Status of alert
	When an alert starts: Alert Happened
	When an alert ends: Alert Stopped
%p%	Origin of alert
	Alert terminal: Alert Input* (* is the terminal
	number)
	All-In-One Headsets and Belt Packs: “Headset”
%i%	IP address of the Center Module
%s%	Information entered in Site Information

Mail for Alert * (*: 1 to 4)

Set the details of the e-mail to be sent when a security alert occurs from an alert input and when the alert ends. For setting details see, “Mail for F button”.

wwConfirming the remaining capacity and the total capacity of the SD card

This tab is used to confirm the total capacity and remaining capacity on an SD card inserted into the Center Module. To display this screen, click the [SD memory card] button in the Setup menu panel.

[Remaining capacity]

Displays the remaining capacity of the SD card. Displayed as “Remaining capacity / Total capacity”.

If there is no SD card inserted, this field displays “--------KB/--------KB”.

26