Panasonic WX-CC411, WX-CC412 operating instructions WwConfirming message settings

Page 20

Browser Operation

[DSP]

This section displays the settings for the three functions involved in voice signal processing (echo canceller, digital noise reduction and ASLC).

Echo Canceller: Displays the echo suppression level. (OFF/ LOW/MID/HIGH)

Digital noise reduction:

Displays the noise suppression level. (OFF/ LOW/MID/HIGH)

ASLC: Displays whether or not Auto Speaker Level Control is being used.

[V/Det camera]

Images from Network Cameras can be displayed on the Center Module LCD display in tandem with the vehicle detector. Select the Network Camera(s) to be displayed on the LCD display.

OFF: The Network Camera(s) are not coupled to the vehicle detector.

Camera 1/2/3/4: When the vehicle detector is ON, the Network Cameras are displayed on the LCD display in tandem with the vehicle detector.

Default setting: OFF

Note

ppBe sure to set a camera that is connected in advance when outputting the NW camera image. To set a camera that is connected, click the [Installation] button in the Setup menu panel, then the [Camera] tab.

wwConfirming message settings

This section is used to confirm the settings for each type of message and the schedule for messages.

To display this screen, click the [Message] button in the Setup menu panel.

qqConfirming greeter message settings [Greeter message]

This tab is used to confirm the settings of the greeter message played when the vehicle detector is ON. This setting can be changed through operations on the Center Module. Click the [Message] button, then the [Greeter message] tab.

[ON/OFF]

Displays whether or not greeter message is being used. OFF: The greeter message is not played back.

ON: The greeter message is played back.

[Volume (0 - 20)]

Displays the volume of the greeter message.

The volume range is from 0 to 20.

[Delay time (0 - 10s)]

Displays the time delay before playing the greeter message when the vehicle detector is ON. The range is 0 to 10 seconds.

[Destination]

Displays broadcast destinations other than the order post speaker from which the greeter message will be played.

ppAll headsets

OFF: The greeter message is not broadcast to any All-In- One Headset or Belt Pack.

ON: The greeter message is broadcast to all All-In-One Headsets or Belt Packs.

ppAUX speaker

OFF: The greeter message is not broadcast to the kitchen speaker.

ON: The greeter message is broadcast to the kitchen speaker.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Operating Instructions Browser Guide Contents WwFeatures WwSystem diagramBefore use WwPrefaceDual lane WwOperationSingle lane WwConcerning the Operating Instructions Tandem laneWwAbbreviations WwSystem requirementsWwTrademarks and registered trademarks Operating precautions WwRouterWwBrowser Refresh Rate WwBrowser CompatibilityNetwork WwExamples of connectionsWwNetwork Security QqDirect connection to the PCBrowser Operation WwConnecting the Center Module via a PCWwSetup Instructions WwOperation Screen WwSetup MenuSetup menu WwConfiguring and Confirming Settings at Installation MaintenanceQqConfirming the date and time setting Date & time NTP/ Time zoneWeb server QqConfiguring network settings NetworkIPv4 Network QqConfiguring server settings Server UPnPTime adjustment interval time Authentication Pp TypePp User password NTP server addressQqSetting Network Cameras connected to the unit Camera Camera 1 toQqSetting Site information Site info QqSetting Help contact Help contactConfiguring Help contact email transmission settings WwConfirming store settings QqConfirming nighttime volume settings Nighttime volumeNighttime volume Level -20 to 0 dBQqConfirming store hours Store hours Store hoursClosed message Holiday messageInput volume Output volumeAux speaker Device for LineWwConfirming message settings QqConfirming greeter message settings Greeter messageMessage list Schedule listPp AUX QqConfirming reminder message settings Reminder messagePp Group Interval time Start Ending timeInterval QqConfirming alert message settings Alert message Destination Pp GroupWwConfirming the security alert settings List of alertsMail for Alert * * 1 to Remaining capacityLane a setting Lane B setting WX‑CC412 only WwConfirming quick operation settingsWwBacking up settings WwPerforming maintenance on Center Module QqChecking the Center Module StatusPp Port number Pp StatusReboot Message Meaning ActionQqRetrieving log data Log Delete checkboxFile column Lane columnUser ID change QqConfirming the software version UpdateQqSetting authentication User mng Password change Old passwordNew password Confirm new passwordWwChecking the status of All-In One Headsets and Belt Packs Information display menuWwChecking the status of alerts QqChecking the status of security alerts Security alertQqChecking the status of system alerts System alert Troubleshooting Pp Is default gateway set for the network? Pp Is port forwarding set for the router?Center Module cannot be Pp Has an SD card been inserted?F0114-0 PGQP1741ZA
Top Page Image Contents