Panasonic WX-CC411 QqConfirming alert message settings Alert message, Destination Pp Group

Page 24

The alert message is not played back. The alert message is played back.

Browser Operation

qqConfirming alert message settings [Alert message]

This tab is used to confirm the alert message to be played during a security alert. Click the [Message] button, then the [Alert message] tab.

[ON/OFF]

Displays whether or not alert message is being used. This setting can be changed through operations on the Center Module.

OFF:

ON:

[Volume (0 - 20)]

Displays the volume of the alert message. The volume range is from 0 to 20. This setting can be changed through operations on the Center Module.

[Delay time (0 - 10s)]

Displays the delay time after the occurrence of an alert until the alert message is played back. The range is 0 to 10 seconds.

Message list

Displays the settings for each alert message. This setting can be changed through operations on the Center Module.

[No.]

Displays the number of the alert message.

[Message name]

Displays the name of the alert message.

[Destination]

ppGroup

Displays the broadcast destination group for the alert message.

All Headsets: The alert message is broadcast to all All- In-One Headsets or Belt Packs.

Group number: The alert message is broadcast to the All-In-One Headsets or Belt Packs in the selected group(s).

ppAUX

Displays whether or not the alert message will be output to the kitchen speaker.

OFF: The alert message is not output to the kitchen speaker.

ON: The alert message is output to the kitchen speaker.

[Upload] button

This button is used to upload a sound source file to replace the sound source file that is currently being used as the alert message.

[Download] button

This button is used to download the sound source file being used as the alert message from the Center Module. The button is disabled when there is no sound source file.

Important

ppSound source files are in the following format. Use compatible software when playing or editing files using a PC.

Format: ADPCM (G.726)

Sampling frequency: 8 kHz

Quantization bit rate: 4 bit

Sound source files that can be uploaded must be in the above format and no longer than 20 seconds.

24

Image 24

Contents Operating Instructions Browser Guide Contents WwFeatures WwSystem diagramBefore use WwPrefaceWwOperation Single laneDual lane WwConcerning the Operating Instructions Tandem laneWwSystem requirements WwTrademarks and registered trademarksWwAbbreviations Operating precautions WwRouterWwBrowser Refresh Rate WwBrowser CompatibilityNetwork WwExamples of connectionsWwNetwork Security QqDirect connection to the PCWwConnecting the Center Module via a PC WwSetup InstructionsBrowser Operation WwSetup Menu Setup menuWwOperation Screen WwConfiguring and Confirming Settings at Installation MaintenanceQqConfirming the date and time setting Date & time NTP/ Time zoneQqConfiguring network settings Network IPv4 NetworkWeb server QqConfiguring server settings Server UPnPTime adjustment interval time Authentication Pp TypePp User password NTP server addressQqSetting Network Cameras connected to the unit Camera Camera 1 toQqSetting Help contact Help contact Configuring Help contact email transmission settingsQqSetting Site information Site info WwConfirming store settings QqConfirming nighttime volume settings Nighttime volumeNighttime volume Level -20 to 0 dBQqConfirming store hours Store hours Store hoursClosed message Holiday messageInput volume Output volumeAux speaker Device for LineWwConfirming message settings QqConfirming greeter message settings Greeter messageMessage list Schedule listQqConfirming reminder message settings Reminder message Pp GroupPp AUX Start Ending time IntervalInterval time QqConfirming alert message settings Alert message Destination Pp GroupWwConfirming the security alert settings List of alertsMail for Alert * * 1 to Remaining capacityWwConfirming quick operation settings WwBacking up settingsLane a setting Lane B setting WX‑CC412 only WwPerforming maintenance on Center Module QqChecking the Center Module StatusPp Port number Pp StatusReboot Message Meaning ActionQqRetrieving log data Log Delete checkboxFile column Lane columnQqConfirming the software version Update QqSetting authentication User mngUser ID change Password change Old passwordNew password Confirm new passwordWwChecking the status of All-In One Headsets and Belt Packs Information display menuWwChecking the status of alerts QqChecking the status of security alerts Security alertQqChecking the status of system alerts System alert Troubleshooting Pp Is default gateway set for the network? Pp Is port forwarding set for the router?Center Module cannot be Pp Has an SD card been inserted?F0114-0 PGQP1741ZA