Panasonic WX-CC411, WX-CC412 QqRetrieving log data Log, Delete checkbox, File column, Lane column

Page 30

Browser Operation

qqRetrieving TALK & PAGE Recording sound source files [Recorded data]

This tab displays sound source files from TALK & PAGE Recording that were recorded during a security alert by holding down button F of an All-In-One Headset or Belt Pack. Click the [Maintenance] button, then the [Recorded data] tab.

[Delete] checkbox

Selects the checkboxes of all TALK & PAGE Recording sound source files. Delete the sound source files that are selected by clicking the [Delete] button.

[File] column

Displays the filename of the sound source file.

[Lane] column

Displays the lane for TALK & PAGE Recording.

[Download] button

This button is used to download a TALK & PAGE Recording file from the Center Module.

[Delete] button

This button is used to delete sound source files with checkboxes selected.

Important

ppSound source files are in the following format. Use compatible software when playing or editing files using a PC.

Format: ADPCM (G.726)

Sampling frequency: 8 kHz

Quantization bit rate: 4 bit

Sound source files that can be uploaded must be in the above format and no longer than 20 seconds.

qqRetrieving log data [Log]

This tab is used to download the operational log of the Center Module. Click the [Maintenance] button, then the [Log] tab.

[Download] button

This button is used to download the log file.

Important

ppNote that Panasonic cannot respond to inquiries about log data.

30

Image 30

Contents Operating Instructions Browser Guide Contents Before use WwFeaturesWwSystem diagram WwPrefaceWwOperation Single laneDual lane WwConcerning the Operating Instructions Tandem laneWwSystem requirements WwTrademarks and registered trademarksWwAbbreviations WwBrowser Refresh Rate Operating precautionsWwRouter WwBrowser CompatibilityWwNetwork Security NetworkWwExamples of connections QqDirect connection to the PCWwConnecting the Center Module via a PC WwSetup InstructionsBrowser Operation WwSetup Menu Setup menuWwOperation Screen QqConfirming the date and time setting Date & time WwConfiguring and Confirming Settings at InstallationMaintenance NTP/ Time zoneQqConfiguring network settings Network IPv4 NetworkWeb server QqConfiguring server settings Server UPnPPp User password Time adjustment interval timeAuthentication Pp Type NTP server addressQqSetting Network Cameras connected to the unit Camera Camera 1 toQqSetting Help contact Help contact Configuring Help contact email transmission settingsQqSetting Site information Site info Nighttime volume WwConfirming store settingsQqConfirming nighttime volume settings Nighttime volume Level -20 to 0 dBClosed message QqConfirming store hours Store hoursStore hours Holiday messageAux speaker Input volumeOutput volume Device for LineWwConfirming message settings QqConfirming greeter message settings Greeter messageMessage list Schedule listQqConfirming reminder message settings Reminder message Pp GroupPp AUX Start Ending time IntervalInterval time QqConfirming alert message settings Alert message Destination Pp GroupWwConfirming the security alert settings List of alertsMail for Alert * * 1 to Remaining capacity WwConfirming quick operation settings WwBacking up settings Lane a setting Lane B setting WX‑CC412 only Pp Port number WwPerforming maintenance on Center ModuleQqChecking the Center Module Status Pp StatusReboot Message Meaning ActionFile column QqRetrieving log data LogDelete checkbox Lane columnQqConfirming the software version Update QqSetting authentication User mngUser ID change New password Password changeOld password Confirm new passwordWwChecking the status of alerts WwChecking the status of All-In One Headsets and Belt PacksInformation display menu QqChecking the status of security alerts Security alertQqChecking the status of system alerts System alert Troubleshooting Center Module cannot be Pp Is default gateway set for the network?Pp Is port forwarding set for the router? Pp Has an SD card been inserted?F0114-0 PGQP1741ZA