Panasonic WX-CC412, WX-CC411 WwConfirming the security alert settings, List of alerts

Browser Operation

wwConfirming the security alert settings

This screen is used to confirm the operations to be performed when a security alert notice is received from button F of an All-In-One Headset or Belt Pack or from alert inputs 1 to 4.

To display this screen, click the [Security alert] button in the Setup menu panel.

List of alerts

Displays the types of security alerts and the operations to perform in the event of a security alert.

[Trigger] column

Displays the types of security alerts.

[Message] column

Displays the alert message to be played during each type of security alert. This setting can be changed through operations on the Center Module.

OFF:The alert message is not played back.

Message number: The alert message is played back.

[Camera monitor] column

Displays the number of the Network Camera that is displayed on the LCD display during each type of security alert. This setting can be changed through operations on the Center Module.

OFF:The image of the Network Camera is not displayed on the LCD display.

Camera number: The image of the Network Camera is displayed on the LCD display.

[Device control] column

Displays whether or not to control external control outputs during each type of security alert. This setting can be changed through operations on the Center Module.

OFF: External control outputs are not controlled.

ON: External control outputs are controlled.

[Audio recording] column

Displays whether or not to record communications onto the SD card when a security alert notice is received from button F of an All-In-One Headset or Belt Pack. This setting can be changed through operations on the Center Module.

OFF: Communications are not recorded.

ON: Communications are recorded.

[Alert input delay time] column

Displays the delay time until sounding a security alert from alert inputs 1 to 4. Can be set from 0 to 29 minutes 59 seconds in increments of 1 second.

[E-mail] column

Set whether or not to send an e-mail when each security alert occurs and ends.

ON: An e-mail will be sent based on the e-mail settings for the alert occurrence and end of alert.

OFF: An e-mail will not be sent for the alert occurrence and end of alert.

Default setting: OFF

Mail for F button

Set the details of the e-mail to be sent when a security alert occurs from button F of an All-In-One Headset or Belt Pack and when the alert ends. This is enabled when an e-mail is set to be sent upon receiving button F of an All-In-One Headset or Belt Pack in the list of alerts.

[Destination E-mail address]

Set the destination email addresses. The same message can be sent to up to 5 email addresses.

Number of characters: 3 to 128

Types of characters: alphanumeric, characters @ . _ ‑

[E-mail subject]

Input the subject of the email.

Number of characters: 0 to 50

[E-mail body]

Input the body of the email.

Number of characters: 0 to 200

25