Windster 100 manual Two-Post Center-Mount Rack Kit Installation

Page 1

Dell™ PowerApp.web 100 and

PowerApp.cache 100 Appliances

Rack Installation Guide

This installation guide provides instructions for trained service technicians installing one or more Dell PowerApp™ 100 appliances in a rack. This guide includes proce- dures for the following three rack kits:

•

•

•

Two-post center-mount

Two-post flush-mount

Four-post rack cabinet

One rack kit is required for each PowerApp 100 system to be installed in the rack.

Two-Post Center-Mount Rack Kit Installation

This procedure provides instructions for installing a Dell PowerApp 100 appliance in a two-post open-frame relay rack, such as those found in telecommunications equip- ment facilities. Both 3-inch and 6-inch wide two-post racks are accommodated.

The two-post open-frame relay rack must be properly secured to the floor, to the ceil- ing or upper wall, and where applicable, to adjacent racks, using floor and wall fasteners and bracing specified or approved by the rack manufacturer or by industry standards. Refer to the two-post open-frame relay rack manufacturer’s installation documentation for precautionary warnings and information before attempting this installation.

CAUTION: Do not attempt to install the PowerApp system into a two-post open-frame relay rack that has not been securely anchored in place. Dam- age to the system and personal injury may result.

Refer to “Safety Instructions” at the front of this document for additional safety infor-

mation regarding rack installation.

support.dell.com

Dell PowerApp 100 Appliances Rack Installation Guide

1

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Two-Post Center-Mount Rack Kit Installation Recommended Tools and Supplies Rack Kit ContentsMarking the Rack Two-Post Open-Frame Relay Rack 1-U Hole Spacing Attaching the BracketsInstalling the System in the Rack Two-Post Flush-Mount Rack Kit InstallationRack Kit Contents Two-Post Flush-Mount Rack Kit Contents Installing the Bracket in the Rack Installing the Bracket in the Rack Installing the Inner Rails on the System ChassisSecuring the Inner Rails to the System Chassis Installing the System in the RackSecuring the Computer System in the Rack Four-Post Rack Kit Installation Before You Begin Four-Post Rack Kit ContentsRecommended Tools and Supplies Installing the Rack KitRemoving the Doors From the 42-U Rack Opening the 42-U Rack Door Removing the 42-U Rack Doors Removing the Doors From the 24-U RackUnlocking the 24-U Rack Door Removing the 24-U Rack Doors Installing the Slide Assemblies in the RackOne Rack Unit Using Template to Mark Vertical Rails Installing the Slide Assemblies Installing the Inner Rails Installing the Computer in the Rack Installing the Cable-Management ArmInstalling the Cable-Management Arm Replacing the Rack Doors on a 42-U Rack Replacing the Rack DoorsReplacing the Rack Doors on a 24-U Rack
Top Page Image Contents