Windster 100 Installing the System in the Rack, Securing the Inner Rails to the System Chassis

Page 9

Figure 7. Securing the Inner Rails to the System Chassis

2.Secure each inner rail to the chassis using two 10-32 x 0.25-inch flat-head screws.

Installing the System in the Rack

CAUTION: Due to the size and weight of the computer system, never attempt to install the computer system by yourself.

1.Remove the optional bezel from the computer front panel. Press the tab on each end of the bezel and pull the bezel straight out from the chassis.

2.Lift the system into position in front of the installed mounting bracket.

3.Move the system back with its inside rail engaging the mounting bracket. Slide the system completely into position and secure it to the rack using the captive fasteners at the outer edge of the front panel (see Figure 8).

4.An internally threaded stud projecting from the front of the tray flanges accepts the captive fastener on the front of the system.

support.dell.com

Dell PowerApp 100 Appliances Rack Installation Guide

9

Image 9

Contents Two-Post Center-Mount Rack Kit Installation Rack Kit Contents Recommended Tools and SuppliesMarking the Rack Two-Post Open-Frame Relay Rack 1-U Hole Spacing Attaching the BracketsInstalling the System in the Rack Two-Post Flush-Mount Rack Kit InstallationRack Kit Contents Two-Post Flush-Mount Rack Kit Contents Installing the Bracket in the Rack Installing the Bracket in the Rack Installing the Inner Rails on the System ChassisSecuring the Inner Rails to the System Chassis Installing the System in the RackSecuring the Computer System in the Rack Four-Post Rack Kit Installation Before You Begin Four-Post Rack Kit ContentsInstalling the Rack Kit Recommended Tools and SuppliesRemoving the Doors From the 42-U Rack Opening the 42-U Rack Door Removing the 42-U Rack Doors Removing the Doors From the 24-U RackUnlocking the 24-U Rack Door Removing the 24-U Rack Doors Installing the Slide Assemblies in the RackOne Rack Unit Using Template to Mark Vertical Rails Installing the Slide Assemblies Installing the Inner Rails Installing the Computer in the Rack Installing the Cable-Management ArmInstalling the Cable-Management Arm Replacing the Rack Doors Replacing the Rack Doors on a 42-U RackReplacing the Rack Doors on a 24-U Rack