Windster 100 manual Removing the Doors From the 24-U Rack, Removing the 42-U Rack Doors

Page 15

hinge

release

lever

Figure 11. Removing the 42-U Rack Doors

3.Repeat steps 1 and 2 to remove the back door from the rack.

Removing the Doors From the 24-U Rack

CAUTION: To prevent personal injury due to the size and weight of the doors, never attempt to remove or replace the doors by yourself.

1.Unlock and twist the handle clockwise (see Figure 12).

2.Open the front door.

support.dell.com

Dell PowerApp 100 Appliances Rack Installation Guide

15

Image 15
Contents Two-Post Center-Mount Rack Kit Installation Rack Kit Contents Recommended Tools and SuppliesMarking the Rack Two-Post Open-Frame Relay Rack 1-U Hole Spacing Attaching the BracketsInstalling the System in the Rack Two-Post Flush-Mount Rack Kit InstallationRack Kit Contents Two-Post Flush-Mount Rack Kit Contents Installing the Bracket in the Rack Installing the Bracket in the Rack Installing the Inner Rails on the System ChassisSecuring the Inner Rails to the System Chassis Installing the System in the RackSecuring the Computer System in the Rack Four-Post Rack Kit Installation Before You Begin Four-Post Rack Kit ContentsInstalling the Rack Kit Recommended Tools and SuppliesRemoving the Doors From the 42-U Rack Opening the 42-U Rack Door Removing the 42-U Rack Doors Removing the Doors From the 24-U RackUnlocking the 24-U Rack Door Removing the 24-U Rack Doors Installing the Slide Assemblies in the RackOne Rack Unit Using Template to Mark Vertical Rails Installing the Slide Assemblies Installing the Inner Rails Installing the Computer in the Rack Installing the Cable-Management ArmInstalling the Cable-Management Arm Replacing the Rack Doors Replacing the Rack Doors on a 42-U RackReplacing the Rack Doors on a 24-U Rack