Windster 100 manual Installing the Inner Rails

Page 21

inner rail (2)

10-24 x 0.375-inch pan- head Phillips screws

Figure 17. Installing the Inner Rails

2.Secure each inner rail to the side of the chassis with three 10-24 x 0.375-inch pan- head Phillips screws (see Figure 17).

Installing the System in the Rack

WARNING: If you are installing more than one computer, install the first computer in the lowest available position in the rack.

WARNING: Never pull more than one component out of the rack at a time.

1.Pull the two interior slide assemblies out of the rack until they lock in the extended position.

CAUTION: Because of the size and weight of the computer, never attempt to install the computer in the slide assemblies by yourself.

2.Lift the computer into position in front of the extended slides.

Grasp the system with one hand on the right side of the computer and the other hand on the left side of the computer.

3.Align the inner rails you installed on the sides of the system with the open por- tion of the slide assemblies (see Figure 18).

4.Push the computer into the slide assemblies until the system stops (see Figure 18).

support.dell.com

Dell PowerApp 100 Appliances Rack Installation Guide

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Two-Post Center-Mount Rack Kit Installation Rack Kit Contents Recommended Tools and SuppliesMarking the Rack Two-Post Open-Frame Relay Rack 1-U Hole Spacing Attaching the BracketsInstalling the System in the Rack Two-Post Flush-Mount Rack Kit InstallationRack Kit Contents Two-Post Flush-Mount Rack Kit Contents Installing the Bracket in the Rack Installing the Bracket in the Rack Installing the Inner Rails on the System ChassisSecuring the Inner Rails to the System Chassis Installing the System in the RackSecuring the Computer System in the Rack Four-Post Rack Kit Installation Before You Begin Four-Post Rack Kit ContentsInstalling the Rack Kit Recommended Tools and SuppliesRemoving the Doors From the 42-U Rack Opening the 42-U Rack Door Removing the 42-U Rack Doors Removing the Doors From the 24-U RackUnlocking the 24-U Rack Door Removing the 24-U Rack Doors Installing the Slide Assemblies in the RackOne Rack Unit Using Template to Mark Vertical Rails Installing the Slide Assemblies Installing the Inner Rails Installing the Computer in the Rack Installing the Cable-Management ArmInstalling the Cable-Management Arm Replacing the Rack Doors Replacing the Rack Doors on a 42-U RackReplacing the Rack Doors on a 24-U Rack
Top Page Image Contents