Windster 100 manual Rack Kit Contents

Page 5

fasteners and bracing specified or approved by the rack manufacturer or by industry standards. Refer to the two-post open-frame relay rack manufacturer’s installation documentation for precautionary warnings and information before attempting this installation.

CAUTION: Do not attempt to install the PowerApp system into a two-post open-frame relay rack that has not been securely anchored in place. Dam- age to the system and personal injury may result.

See “Safety Instructions” found earlier in this guide for additional safety information regarding rack installation.

Rack Kit Contents

The two-post flush-mount rack kit includes the following items (see Figure 4):

•

•

•

•

•

Two flush-mount brackets

Two inner mounting rails

Four 12-24 x 0.5-inch pan-head Phillips (or slotted) screws

Four 10-24 x 0.25-inch flat-head slotted screws for securing the inner mounting rails to the sides of the system

One 1-U template

support.dell.com

Dell PowerApp 100 Appliances Rack Installation Guide

5

Image 5

Contents Two-Post Center-Mount Rack Kit Installation Marking the Rack Rack Kit ContentsRecommended Tools and Supplies Two-Post Open-Frame Relay Rack 1-U Hole Spacing Attaching the BracketsInstalling the System in the Rack Two-Post Flush-Mount Rack Kit InstallationRack Kit Contents Two-Post Flush-Mount Rack Kit Contents Installing the Bracket in the Rack Installing the Bracket in the Rack Installing the Inner Rails on the System ChassisSecuring the Inner Rails to the System Chassis Installing the System in the RackSecuring the Computer System in the Rack Four-Post Rack Kit Installation Before You Begin Four-Post Rack Kit ContentsRemoving the Doors From the 42-U Rack Installing the Rack KitRecommended Tools and Supplies Opening the 42-U Rack Door Removing the 42-U Rack Doors Removing the Doors From the 24-U RackUnlocking the 24-U Rack Door Removing the 24-U Rack Doors Installing the Slide Assemblies in the RackOne Rack Unit Using Template to Mark Vertical Rails Installing the Slide Assemblies Installing the Inner Rails Installing the Computer in the Rack Installing the Cable-Management ArmInstalling the Cable-Management Arm Replacing the Rack Doors on a 24-U Rack Replacing the Rack DoorsReplacing the Rack Doors on a 42-U Rack