Windster 100 manual Opening the 42-U Rack Door

Page 14

push-button cover

push button

handle

Figure 10. Opening the 42-U Rack Door

2.Remove the front door from the rack as shown in Figure 11.

a.One person should grasp the top of the door to stabilize it. The other person should grasp the bottom of the door.

b.The person holding the bottom of the door should press the hinge release lever on the bottom hinge and then pull the door away from the rack.

c.The person holding the top of the door should press the hinge release lever on the top hinge and then pull the door away from the rack.

14 Dell PowerApp 100 Appliances Rack Installation Guide

Image 14

Contents Two-Post Center-Mount Rack Kit Installation Marking the Rack Rack Kit ContentsRecommended Tools and Supplies Attaching the Brackets Two-Post Open-Frame Relay Rack 1-U Hole SpacingTwo-Post Flush-Mount Rack Kit Installation Installing the System in the RackRack Kit Contents Two-Post Flush-Mount Rack Kit Contents Installing the Bracket in the Rack Installing the Inner Rails on the System Chassis Installing the Bracket in the RackInstalling the System in the Rack Securing the Inner Rails to the System ChassisSecuring the Computer System in the Rack Four-Post Rack Kit Installation Four-Post Rack Kit Contents Before You BeginRemoving the Doors From the 42-U Rack Installing the Rack KitRecommended Tools and Supplies Opening the 42-U Rack Door Removing the Doors From the 24-U Rack Removing the 42-U Rack DoorsUnlocking the 24-U Rack Door Installing the Slide Assemblies in the Rack Removing the 24-U Rack DoorsOne Rack Unit Using Template to Mark Vertical Rails Installing the Slide Assemblies Installing the Inner Rails Installing the Cable-Management Arm Installing the Computer in the RackInstalling the Cable-Management Arm Replacing the Rack Doors on a 24-U Rack Replacing the Rack DoorsReplacing the Rack Doors on a 42-U Rack