Uniden XSA660, XSA650 manual Chain Dialling, Erasing a Stored Number, Replacing a Stored Number

If you attempt to dial a memory location that does not have a stored number, the handset will beep rapidly (error tone) and the phone will not dial.

Chain Dialling

After dialling a number you may be requested to enter a special access code, for example, when performing a banking transaction.

1.Store the access code into one of the memory locations (0-9).

2.Dial the main number.

3.Press mem and the memory location where you stored the access code at the appropriate time.

Erasing a Stored Number

1.Remove the handset from the base.

2.Press mem twice.

3.Press the memory location number (0-9) you want to clear. You hear a long beep confirming that you have erased the number.

Replacing a Stored Number

Remember your XSA660 or XSA650 phone has 10 memory locations per handset, represented by the numbers 0-9 on the keypad. If you store a phone number in one of these locations, then store a different number in the same location later, the new number will replace the previous one.

18