Uniden XSA660, XSA650 manual To turn the Answering System on, press answer, Setting the Clock

Page 26

When the Message Counter LED flashes, you have unread new messages.

Switching the Answer Machine On/Off

1.To turn the Answering System on, press answer.

A tone sounds, and the current outgoing message plays on the Base Unit speaker and the Message Counter LED turns on. A second tone sounds to indicate the unit is ready to answer calls.

repeat ogm memo skip

▼ ▼

▼ ▼

pin

clock answer page

2.To turn the Answering System off, press answer again. A tone sounds and the Message Counter LED turns off.

Setting the Clock

The clock in your XSA660/650 Answering System starts when power is applied to the Base Unit. Follow these steps to set the clock to the correct time.

1.Press and hold the clock button until a beep tone is heard and the day is announced.

mic

▼

repeat ogm memo skip

▼ ▼

▼ ▼

pin

clock answer page

2.Press skip or repeat until the correct day is announced.

3.Press clock again. Press skip or repeat until the correct hour is announced.

4.Press clock again. Press skip or repeat until the correct minute is announced.

5.Press clock again. Press skip or repeat to select AM [ - A ] or PM [ - P ] .

6.Press clock to return to Standby.

The selected time and day is announced For example, to set Tuesday at 3.10AM:

Press and hold clock then “Sunday” will be announced.

mic

▼

Day of the Week

Display

Sunday

- 0

Monday

- I

Tuesday

- 2

Wednesday

- 3

Thursday

- 4

Friday

- 5

Saturday

- 6

Press skip x 2 times, “Tuesday”, will be announced. Press clock then skip 4 times “three, will be announced. Press clock then skip 11 times “ten”, will be announced. Press clock then skip 1 time “AM”, will be announced.

Press clock to finish, the complete time and day will be announced.

20

Page 25 Page 27
Image 26
Page 25 Page 27
Contents XSA660 XSA650 Model XSA650 Controls and FunctionsModel XSA660 Handset Retainer holds handset in base for Wall Mounting Plug the battery into each handset Important NotePrerecorded outgoing message will play Press the talk buttonDial the number and make the call Press the play button on the baseContents Included in Your Package Registration CardTelephone Line Problems RangeRechargeable Nickel-Cadmium Battery Warning PrecautionsPrecautions Important Safety Instructions Radio Interference More Than One Cordless TelephoneUltraClear Plus innovative technology, together with 10 AUS FeaturesWelcome Installing InstallationDesk or Tabletop Installation Wall InstallationMounting on a Standard Wall Plate Mounting Directly on a Wall Setting the Handset Earpiece Volume Setting UP Your PhoneRinger Tone and Volume Raising the AntennaContinuous Battery Charging Installing the Battery PackReplace the battery cover Charging the HandsetCleaning the Battery Contacts Low Battery IndicatorDuring a call Standby Mode Automatic Digital Code Security Making and Receiving Calls UsingUsing Your Phone Changing Channels, Flash Dialing a Stored Number Storing a Number in MemoryEntering a Pause in Memory Dialling Replacing a Stored Number Chain DiallingErasing a Stored Number Way Conference Setting the Handset Number XSA660 onlyCall Transfer XSA660 only Press skip or repeat until the correct day is announced Setting the ClockTo turn the Answering System on, press answer Press clock to return to StandbySelecting a Preset OGM Setting your Outgoing Message OGMPreset Messages Reviewing Time and Day StampSetting the Toll Saver Switch Can hang up after the second ring and not be billedWhen all messages have played, a long tone sounds Playing New MessagesRepeating a Message Base Operation Skipping a Message Base OperationDeleting all Messages Message Full IndicationScreening Incoming Calls Leaving a Memo MessageRemote Operation Setting Your PIN CodeUsing a Touch-Tone Phone Function PressTroubleshooting Trouble ShootingOr 1-minute position Does not Specifications SpecificationsWarranty WarrantyUniden Australia Pty Limited Uniden New Zealand Limited
Top Page Image Contents