Uniden XSA660, XSA650 manual Troubleshooting, Trouble Shooting

Page 34

TROUBLESHOOTING

YOUR NEW PHONE

TROUBLE SHOOTING

If your XSA660 or XSA650 Integrated Telephone Answering Device is not performing to your expectations, please try these simple steps. If you are still unable to resolve the problems, contact Uniden Customer Service for assistance.

Caution: Do not attempt to service this until yourself. Servicing must be performed by qualified personnel.

	PROBLEM		SUGGESTION

		●	Make sure the AC adaptor is plugged into the base and
	Charge light won’t		wall outlet.
	come on when	●	Make sure the handset is properly seated in base.
	handset is placed	●	Make sure the charging contacts on the handset and base
	in base.	●	Make sure the charging contacts on the handset and base
	in base.		are clean. See page 14
			are clean. See page 14

		●	Make sure that the base antenna is fully extended in the
			vertical position.
	The audio sounds	●	Interference by other electronics equipment such as TVs.
	weak and/or	●	Interference by other electronics equipment such as TVs.
	weak and/or		Computers microwaves etc.
	scratchy.		Computers microwaves etc.
	scratchy.	●	You may have gone too far from the base.
		●	You may have gone too far from the base.
		●	Press the chan key to search for clearer reception.

		●	Check both ends of the base telephone line cord are
			plugged in fully.
		●	Make sure the AC adaptor is plugged into the base and
	Can’t make or		wall outlet.
	Can’t make or	●	Disconnect the AC adaptor for a few minutes, then
	receive calls.	●	Disconnect the AC adaptor for a few minutes, then
	receive calls.		reconnect it.
			reconnect it.
		●	Reset security code by placing the handset back on the
			base for a few seconds. The status LED will blink
			indicating that the phone has been reset.

		●	The Nickel-Cadmium battery pack may be weak.
			Charge the battery for 15-20 hours.
	The handset	●	The handset may be too far away from the base.
	The handset		Place the base away from appliances or metal objects.
	doesn’t ring or	●	Place the base away from appliances or metal objects.
	doesn’t ring or		Reset security code by placing the handset back on the
	receive a page.	●	Reset security code by placing the handset back on the
	receive a page.		charging cradle for a few seconds. The status LED will
			charging cradle for a few seconds. The status LED will
			blink indicating that the phone has been reset.

28

Image 34

Contents XSA660 XSA650 Model XSA660 Controls and FunctionsModel XSA650 Handset Retainer holds handset in base for Wall Mounting Plug the battery into each handset Important NotePrerecorded outgoing message will play Press the talk buttonDial the number and make the call Press the play button on the baseContents Included in Your Package Registration CardTelephone Line Problems RangePrecautions PrecautionsRechargeable Nickel-Cadmium Battery Warning Important Safety Instructions Radio Interference More Than One Cordless TelephoneWelcome FeaturesUltraClear Plus innovative technology, together with 10 AUS Installing InstallationDesk or Tabletop Installation Wall InstallationMounting on a Standard Wall Plate Mounting Directly on a Wall Setting the Handset Earpiece Volume Setting UP Your PhoneRinger Tone and Volume Raising the AntennaContinuous Battery Charging Installing the Battery PackReplace the battery cover Charging the HandsetDuring a call Standby Mode Low Battery IndicatorCleaning the Battery Contacts Automatic Digital Code Security Using Your Phone UsingMaking and Receiving Calls Changing Channels, Flash Entering a Pause in Memory Dialling Storing a Number in MemoryDialing a Stored Number Erasing a Stored Number Chain DiallingReplacing a Stored Number Call Transfer XSA660 only Setting the Handset Number XSA660 onlyWay Conference Press skip or repeat until the correct day is announced Setting the ClockTo turn the Answering System on, press answer Press clock to return to StandbySelecting a Preset OGM Setting your Outgoing Message OGMPreset Messages Reviewing Time and Day StampSetting the Toll Saver Switch Can hang up after the second ring and not be billedWhen all messages have played, a long tone sounds Playing New MessagesRepeating a Message Base Operation Skipping a Message Base OperationDeleting all Messages Message Full IndicationScreening Incoming Calls Leaving a Memo MessageRemote Operation Setting Your PIN CodeUsing a Touch-Tone Phone Function PressTroubleshooting Trouble ShootingOr 1-minute position Does not Specifications SpecificationsWarranty WarrantyUniden Australia Pty Limited Uniden New Zealand Limited