Panasonic SL-PR300 operating instructions Using the Remote Control, Inserting the Batteries

Page 12

Using the Remote Control

Inserting the Batteries

1 Press down on the point shown by the arrow at the top of the compartment cover, and lift the cover to open the compartment.

2 Place the two accompanying batteries in the remote control making sure to match the battery polarities with the markings (“+”/“–”) inside the compartment.

(R6, AA, UM-3)

3 Place the cover over the compartment and press down lightly until it locks in place.

Align the poles (+ and –) properly when inserting the batteries.

Do not mix old and new batteries or different types of batteries.

Do not recharge ordinary dry cell batteries.

Do not heat or disassemble the batteries. Do not allow them to contact flame or water.

Remove the batteries if the unit is not to be used for a long time.

Do not keep together with metallic objects such as necklaces.

Do not use batteries if the covering has been peeled off.

Do not use rechargeable type batteries.

Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.

If electrolyte leaks from the batteries, consult your dealer.

Wash thoroughly with water if electrolyte comes in contact with any part of your body.

Using the Remote Control

 

 

 

 

 

 

 

 

 

 

MULTI JOG

 

COMPACT DISC RECORDER SL-PR300

 

 

 

 

 

 

REC LEVEL

POWER

 

 

OPEN /

DISC

 

 

 

 

 

+

 

 

CLOSE

SELECTOR

 

 

 

 

OPEN /

 

 

 

DISC 3

3

 

 

 

 

CLOSE

 

 

 

 

 

DISC 2

2

 

 

 

 

 

 

 

 

 

 

DISC 1

DIGITAL

CD

LINE

 

 

REC SELECTOR

 

 

PHONES

 

 

1

 

 

 

 

 

MIX BALANCE

MIN MAX

 

 

 

 

 

 

 

 

 

LINE

CD

PLAY MODE

CD EDIT

CD REC

 

 

SYNCHRO

MENU

SET

CANCEL

 

 

 

 

 

 

 

 

FINALIZE

 

 

REC/

 

 

 

 

 

 

 

 

 

 

REC MUTE

 

 

30° 30°

DISC SELECTOR

CD1

CD2

CD3

CD REC

CD EDIT

FINALIZE DISPLAY

1

2

 

3

4

5

 

6

7

8

 

9

0

>10

 

 

PLAY

REPEAT

CONTROL

MODE

CD

CD-R/RW

REC

FADE

SYNCHRO

REC MUTE

 

 

 

REC

R

 

MENU

SELECTO

 

 

PITCH+

 

 

 

SET

 

 

 

PITCH–

 

 

PIT

 

 

EL

CH 0

 

 

CANC

COMPACT DISC RECORDER

RAK-PR300

Point the remote control toward the left side of the front panel of the main unit before you begin pressing buttons.

The remote control can be operated at a distance of up to approximately 7m (23ft) from the main unit. This distance will be less if the remote control is operated from a position that is not directly in front or on the same level as the main unit.

When the distance over which the remote control can be oper- ated starts to drop, the batteries are nearing the end of their ser- vice life.

The batteries provided are for checking system operations only. Replace them with new batteries as soon as possible.

Do not drop the remote control or subject it to strong impact.

Do not expose the main unit and remote control to direct sun- light or other intense sources of light.

Do not place objects blocking the path of signals being trans- mitted from the remote control to the main unit.

Take care to keep the remote control signal sensor and end of the remote control unit free from dust.

If this system is installed in a rack with glass doors, the thick- ness and color of the glass doors might make it necessary to use the remote control a shorter distance from the system.

Do not place heavy items on the unit.

Do not disassemble or reconstruct it.

Do not spill water or other liquids onto it.

RQT6087

Image 12
Contents Compact Disc Recorder Table of Contents Listening Caution User memoLaser product label has not been attached to this product Features Storage precautions Handling precautionsConcerning CDs Do not place or store CDs in the following placesConnections Analog ConnectionsConnections Digital ConnectionsDigital Optical and Coaxial Cable Connections Optical Cable Input/Output TerminalsComponents Main UnitHeadphones Jack Phones Level Volume ControlRemote Control Sensor ComponentsDisplay Window Using the Remote Control Remote ControlUsing the Remote Control Using the Remote ControlInserting the Batteries Power STANDBY/ON Operations Turning the Power On and Standby ModeTo turn power to the unit on To put the unit in standby mode during operationPlaying CDs using the CD Control Play pbutton Listening to CDsCD Changer Continuous Playback Press the Disc Selector 1 buttonListening to CDs CDR Playback OperationsUsing the Remote Control to Control Playback To stop CDR playback temporarilyRemoving a CD from the CDR Press the CD or CDR button to select the deckDirect Playback of a Specific Track Forward and Reverse SearchPress the number buttons of the track you want to play To select a two-digit track numberSetting the repeat play mode Using repeat mode during program or random play modesSkipping Tracks Repeat PlaybackTo release the random playback mode To adjust the pitch of a CD during playbackRandom Playback CD Playback Pitch ControlProgramming Playback Using Main Unit Controls Load CDs into the trays of the 3-CD changerPress the SET button to start program registration Repeat steps 4 and 5 to program up to a maximum of 32 stepsProgramming Playback Using the Remote Control Press the Play Mode buttonPress the CD Control Play p button to start programmed play Press the SET buttonRepeat steps 5 and 6 to program up to a maximum of 32 steps Press the p button to start program playAdd Finalize Feature To enable the Add Finalize featureRecording onto CD-R/RW Discs Read through this section before recordingRecording onto CD-R/RW Discs Manual RecordingTo increase the recording level from Line Turn the Multi JOG to select High Press the SET buttonPress 1REC/REC Mute to put the CDR in recording pause mode When recording is completeTo record silence in the recording Auto Track function onSynchronized Recording of 3-CD Changer Playback To add track marks automaticallyAuto Track function off When ADD FINALIZE? is shown in the information window Select and stop the CD to be recordedTo stop the recording at any time Checking a track number during recordingWhen recording completes Disc DubbingSelect a disc and start playback Insert a recordable CD-R or CD-RW disc in the CDR disc trayWhen the first track has been stored in memory Listening Edit RecordingProgram Edit Recording Load CDs in the 3-CD changerLoad a recordable CD-R or CD-RW disc in the CDR tray Recording process startsSelect and enter the disc number Select and enter a track numberRepeat steps 4 and 5 to continue programming tracks Setting the Unit for High-speed Recording Pess the SET buttonPress the Synchro button main unit/remote control Synchronized Recording from External SourcesStart playing of the source unit Synchronized recording to the CDR from an external sourceMixed Input Recording Load a recordable CD-R or CD-RW in the CDR disc trayMIX Balance Line Special Recording Edit Operations Skipping a Recorded Track on a CD-R or CD-RW Track SkipErasing a Track or Tracks Erase Function CD-RW only Special Recording Edit Operations Erasing All Tracks Disc Erase Function CD-RW onlyLoad the CD-RW to be erased in the CDR disc tray Press the Finalize button main unit/remote control Finalizing a DiscLoad a finalized CD-RW disc into the CDR disc tray Press the SET button again to confirm the operation Resetting the Unit to Factory Default Settings 4 CancelSetting the Clock Ways to change or adjust the time displayExample Setting the Clock To ascertain the correct timeTimer Operations Timer Play wake-up playTimer Operations Set the power to standby modeWith Unit Power Turned On From Standby ModeLoad a recordable CD-R or CD-RW disc into the CDR CD and CDR Messages Message Significance RemedyCD and CDR Messages Disc FullScms Serial Copy Management System Troubleshooting CommonSpecifications Product serviceProduct information

SL-PR300 specifications

The Panasonic SL-PR300 is a remarkable portable CD player that combines advanced technology with user-friendly features. Released during the height of the CD boom, it showcased Panasonic’s commitment to quality audio and innovative design in portable music solutions.

One of the standout features of the SL-PR300 is its compact and lightweight design, making it easy to carry for on-the-go listening. The player measures just under 1.5 inches thick, allowing it to fit comfortably into bags and backpacks, making it a popular choice for travel enthusiasts.

The SL-PR300 is equipped with a high-quality 1-bit Digital-to-Analog Converter (DAC), which ensures clear and precise sound reproduction. This technology enhances audio quality by reducing distortion and providing a more immersive listening experience. The player supports a range of CD formats, including standard audio CDs and CD-R/RW discs, making it versatile for various music collections.

One of the innovative features integrated into the SL-PR300 is the anti-shock technology, designed to minimize skips and interruptions during playback. This is particularly beneficial for users who enjoy listening while they move, providing a smooth experience even when walking or exercising.

Additionally, the SL-PR300 offers a rechargeable battery option, providing convenience and sustainability for music lovers. Users can easily recharge the player, reducing the need for disposable batteries and allowing extended listening sessions without interruption. The long battery life also ensures that users can enjoy their music without frequent recharging, perfect for long journeys or outdoor activities.

For ease of use, the SL-PR300 features an intuitive interface with simple controls, allowing users to navigate their playlists effortlessly. The large, easy-to-read LCD screen provides essential information such as track number and playback time, enhancing the overall user experience.

In terms of connectivity, the player includes a headphone jack, providing a direct and personal listening experience. The SL-PR300’s durable construction ensures it can withstand the rigors of daily use, making it a dependable choice for music enthusiasts looking for a reliable portable CD player.

In summary, the Panasonic SL-PR300 stands out in the portable audio market with its combination of advanced technology, user-friendly design, and portability. With features such as anti-shock technology, rechargeable battery options, and high-quality audio output, it remains a noteworthy choice for anyone looking to enjoy CDs on the go.