Panasonic SL-PR300 Using the Remote Control to Control Playback, To stop CDR playback temporarily

Page 16
CD button: CDR button:

Listening to CDs

To stop CDR playback temporarily

•Pressing the CDR Control PAUSE Sbutton at any time when a CD is playing in the CDR pauses playback. Press the CDR Con- trol PLAY p button to resume playback.

•When playback is paused, the S indicator is shown in the dis- play window.

Removing a CD from the CDR

•To remove a CD from the CDR, press the CDR OPEN/CLOSE 0 button. To remove a CD when it is being played back, it is recommended that playback first be ended by pressing the CDR Control STOP s button before pressing the OPEN/CLOSE 0 button. After pressing the OPEN/CLOSE 0button, the tray will open and the CD can be removed. Press the OPEN/CLOSE 0 button once more to close the tray.

Notes

•When an unfinalized CD-R or CD-RW is loaded in the CDR and the CDR OPEN/CLOSE 0 button is pressed to open the CDR disc tray, “FINALIZE?” is shown in the information dis- play. If you do not wish to finalize the CD at that time, press the CDR OPEN/CLOSE 0 button again. For more information on finalizing a CD, see page 38.

•If playback of an unfinalized disc is stopped or if tracks are skipped (forward or reverse), some data of the track (or begin- ning of next track in the case of skipping) may be cut (not read) when playback starts again.

•The total track time does not always match total playback time (time shown in the information display) exactly because the playback time includes lead-in and lead-out spaces as well.

Using the Remote Control to Control Playback

CD1, CD2, CD3

DISC SELECTOR

CD1 CD2 CD3

 

CD REC CD EDIT FINALIZE DISPLAY

1

 

2

 

3

 

4

 

5

 

6

 

7

 

8

 

9

 

0

 

>10

 

 

 

PLAY

REPEAT

CONTROL

1

MODE

CD

CD-R/RW

•REC

 

FADE

SYNCHRO

REC MUTE

 

 

 

 

2

 

 

 

 

 

SELECTOR

 

 

MENU

 

REC

 

 

 

 

 

 

 

PITCH+

 

 

 

 

 

SET

 

 

 

 

 

PITCH–

 

 

 

PITCH 0

 

 

 

CANCEL

 

COMPACT DISC RECORDER

RAK-PR300

1 Press the CD or CDR button to select the deck.

To control discs in the 3-CD changer

To control the disc in the CDR

•Pressing the CD1, CD2 or CD3 button automatically sets the unit to the 3-CD changer and starts playback of the disc in the selected tray.

•When the CD function is selected, the CD PLAYER indicator is shown in the display window. When the CDR function is selected, the CD RECORDER indicator is shown.

2 Press the command button of the operation you want to perform.

•The buttons on the remote control perform the same operations as the corresponding buttons on the main unit.

•The command is applied to the 3-CD changer or CDR depend-

ing on the function currently selected.

RQT6087

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Compact Disc Recorder Table of Contents User memo Listening CautionLaser product label has not been attached to this product Features Storage precautions Handling precautionsConcerning CDs Do not place or store CDs in the following placesConnections Analog ConnectionsConnections Digital ConnectionsDigital Optical and Coaxial Cable Connections Optical Cable Input/Output TerminalsComponents Main UnitHeadphones Jack Phones Level Volume ControlRemote Control Sensor ComponentsDisplay Window Using the Remote Control Remote ControlUsing the Remote Control Using the Remote ControlInserting the Batteries Power STANDBY/ON Operations Turning the Power On and Standby ModeTo turn power to the unit on To put the unit in standby mode during operationPlaying CDs using the CD Control Play pbutton Listening to CDsCD Changer Continuous Playback Press the Disc Selector 1 buttonListening to CDs CDR Playback OperationsUsing the Remote Control to Control Playback To stop CDR playback temporarilyRemoving a CD from the CDR Press the CD or CDR button to select the deckDirect Playback of a Specific Track Forward and Reverse SearchPress the number buttons of the track you want to play To select a two-digit track numberSetting the repeat play mode Using repeat mode during program or random play modesSkipping Tracks Repeat PlaybackTo release the random playback mode To adjust the pitch of a CD during playbackRandom Playback CD Playback Pitch ControlProgramming Playback Using Main Unit Controls Load CDs into the trays of the 3-CD changerPress the SET button to start program registration Repeat steps 4 and 5 to program up to a maximum of 32 stepsProgramming Playback Using the Remote Control Press the Play Mode buttonPress the CD Control Play p button to start programmed play Press the SET buttonRepeat steps 5 and 6 to program up to a maximum of 32 steps Press the p button to start program playAdd Finalize Feature To enable the Add Finalize featureRecording onto CD-R/RW Discs Read through this section before recordingRecording onto CD-R/RW Discs Manual RecordingTo increase the recording level from Line Turn the Multi JOG to select High Press the SET buttonPress 1REC/REC Mute to put the CDR in recording pause mode When recording is completeTo record silence in the recording Auto Track function onTo add track marks automatically Synchronized Recording of 3-CD Changer PlaybackAuto Track function off When ADD FINALIZE? is shown in the information window Select and stop the CD to be recordedTo stop the recording at any time Checking a track number during recordingWhen recording completes Disc DubbingSelect a disc and start playback Insert a recordable CD-R or CD-RW disc in the CDR disc trayWhen the first track has been stored in memory Listening Edit RecordingProgram Edit Recording Load CDs in the 3-CD changerLoad a recordable CD-R or CD-RW disc in the CDR tray Recording process startsSelect and enter a track number Select and enter the disc numberRepeat steps 4 and 5 to continue programming tracks Setting the Unit for High-speed Recording Pess the SET buttonPress the Synchro button main unit/remote control Synchronized Recording from External SourcesStart playing of the source unit Synchronized recording to the CDR from an external sourceMixed Input Recording Load a recordable CD-R or CD-RW in the CDR disc trayMIX Balance Line Skipping a Recorded Track on a CD-R or CD-RW Track Skip Special Recording Edit OperationsErasing a Track or Tracks Erase Function CD-RW only Erasing All Tracks Disc Erase Function CD-RW only Special Recording Edit OperationsLoad the CD-RW to be erased in the CDR disc tray Finalizing a Disc Press the Finalize button main unit/remote controlLoad a finalized CD-RW disc into the CDR disc tray Press the SET button again to confirm the operation Resetting the Unit to Factory Default Settings 4 CancelWays to change or adjust the time display Setting the ClockExample Setting the Clock To ascertain the correct timeTimer Operations Timer Play wake-up playTimer Operations Set the power to standby modeWith Unit Power Turned On From Standby ModeLoad a recordable CD-R or CD-RW disc into the CDR CD and CDR Messages Message Significance RemedyCD and CDR Messages Disc FullScms Serial Copy Management System Troubleshooting CommonProduct service SpecificationsProduct information

SL-PR300 specifications

The Panasonic SL-PR300 is a remarkable portable CD player that combines advanced technology with user-friendly features. Released during the height of the CD boom, it showcased Panasonic’s commitment to quality audio and innovative design in portable music solutions.

One of the standout features of the SL-PR300 is its compact and lightweight design, making it easy to carry for on-the-go listening. The player measures just under 1.5 inches thick, allowing it to fit comfortably into bags and backpacks, making it a popular choice for travel enthusiasts.

The SL-PR300 is equipped with a high-quality 1-bit Digital-to-Analog Converter (DAC), which ensures clear and precise sound reproduction. This technology enhances audio quality by reducing distortion and providing a more immersive listening experience. The player supports a range of CD formats, including standard audio CDs and CD-R/RW discs, making it versatile for various music collections.

One of the innovative features integrated into the SL-PR300 is the anti-shock technology, designed to minimize skips and interruptions during playback. This is particularly beneficial for users who enjoy listening while they move, providing a smooth experience even when walking or exercising.

Additionally, the SL-PR300 offers a rechargeable battery option, providing convenience and sustainability for music lovers. Users can easily recharge the player, reducing the need for disposable batteries and allowing extended listening sessions without interruption. The long battery life also ensures that users can enjoy their music without frequent recharging, perfect for long journeys or outdoor activities.

For ease of use, the SL-PR300 features an intuitive interface with simple controls, allowing users to navigate their playlists effortlessly. The large, easy-to-read LCD screen provides essential information such as track number and playback time, enhancing the overall user experience.

In terms of connectivity, the player includes a headphone jack, providing a direct and personal listening experience. The SL-PR300’s durable construction ensures it can withstand the rigors of daily use, making it a dependable choice for music enthusiasts looking for a reliable portable CD player.

In summary, the Panasonic SL-PR300 stands out in the portable audio market with its combination of advanced technology, user-friendly design, and portability. With features such as anti-shock technology, rechargeable battery options, and high-quality audio output, it remains a noteworthy choice for anyone looking to enjoy CDs on the go.
Top Page Image Contents