Panasonic SL-PR300 operating instructions Press the SET button again to confirm the operation

Page 39

Special Recording Edit Operations

5 Press the SET button again to confirm the operation.

•“UNFINALIZE” is shown in the information display as the unfinalizing procedure is performed. The procedure takes a lit- tle over a minute, and the level meter is used to indicate approx- imately how much time is remaining until unfinalization is complete. Upon completion, the normal display is shown.

Bypassing the FS Converter (Sampling Frequency Converter*) for More Efficient Digital Recording

* known as Sampling Rate Converter.

The FS converter of this unit performs the conversion of digital sig- nals from sources that use sampling frequencies other than

44.1kHz to the sampling frequency of 44.1 kHz, which is neces- sary for recording the signals to a CD-R or CD-RW disc.

• When the FS converter is turned off, the converter is bypassed if the digital signal of the source has a sampling frequency of

44.1kHz and when analog and multiple input recording are per- formed.

•If source sampling frequencies of 32 kHz or 48 kHz are detected, the FS converter is activated automatically and the sig- nal is routed through it.

•When the FS converter is turned on, all signals to be recorded are routed through it regardless of the sampling frequency, even the 44.1 kHz digital signal is passed through it as the converter works as a filter to reduce signal fluctuation in the disc record- ing. For this reason, having the function set to “ON” is recom- mended for most recording purposes.

•When recording specially encoded discs such as dts*1, HDCD*2, etc., be sure to turn the converter off (setting to

“OFF”) using the following procedure (see step 4).

*1dts is trademark of Digital Theater Systems, Inc.

*2HDCDis a registered trademark of Pacific Microsonic, Inc.

Note

•When recording from the 3-CD changer, the sampling rate con- verter is always turned off.

 

 

 

 

 

 

 

 

 

 

 

2,4

 

 

 

 

 

 

 

 

 

 

 

MULTI JOG

 

 

COMPACT DISC RECORDER SL-PR300

 

 

 

 

 

 

REC LEVEL

POWER

 

 

 

OPEN /

DISC

 

 

 

 

 

–

+

 

 

 

CLOSE

SELECTOR

 

 

 

 

OPEN /

 

 

 

 

DISC 3

3

 

 

 

 

CLOSE

 

 

 

 

 

 

DISC 2

2

 

 

 

 

 

 

 

 

 

 

 

DISC 1

DIGITAL

CD

LINE

 

 

REC SELECTOR

 

 

PHONES

 

 

1

 

 

 

 

 

MIX BALANCE

MIN

MAX

 

 

 

 

 

 

 

 

 

LINE

CD

PLAY MODE

CD EDIT

CD REC

 

 

SYNCHRO

MENU

SET

CANCEL

 

 

 

 

 

 

 

 

 

FINALIZE

 

 

REC/

 

 

 

 

 

 

 

 

 

 

 

REC MUTE

 

 

1 3,5 CANCEL

 

DISC SELECTOR

 

 

 

CD1

CD2

CD3

 

 

 

CD REC

CD EDIT

FINALIZE

DISPLAY

 

 

1

 

2

3

 

 

4

 

5

6

 

 

7

 

8

9

 

 

0

>10

 

 

 

PLAY

REPEAT

CONTROL

 

 

MODE

CD

CD-R/RW

 

 

•REC

 

FADE

SYNCHRO

 

 

REC MUTE

 

 

 

 

2,4

SELECTOR

 

MENU

1

REC

 

 

 

 

SET

 

3,5

 

PITCH+

 

PITCH 0

PITCH–

CANCEL

CANCEL

COMPACT DISC RECORDER

RAK-PR300

1 When the unit is in the stop mode, press the MENU button (main unit/remote control).

2 Turn the MULTI JOG control on the main unit or press the P/p(menu) button on the remote control until “CONVERTER” is shown in the information display.

3 Press the SET button (main unit/remote control).

•The “CONVERTER ON” is shown and “ON” flashes in the information display. (The default setting is “ON”.)

•Press the CANCEL button (main unit/remote control) if you do not wish to perform this procedure.

4 Turn the MULTI JOG control on the main unit or press the P/p(menu) button on the remote control to select “ON” or “OFF”.

•Press the CANCEL button (main unit/remote control) if you do not want to perform this procedure. The setting is not changed.

5 Press the SET button (main unit/remote control).

RQT6087

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Compact Disc Recorder Table of Contents Listening Caution User memoLaser product label has not been attached to this product Features Do not place or store CDs in the following places Storage precautionsHandling precautions Concerning CDsAnalog Connections ConnectionsOptical Cable Input/Output Terminals ConnectionsDigital Connections Digital Optical and Coaxial Cable ConnectionsMain Unit ComponentsComponents Headphones JackPhones Level Volume Control Remote Control SensorDisplay Window Remote Control Using the Remote ControlUsing the Remote Control Using the Remote ControlInserting the Batteries To put the unit in standby mode during operation Power STANDBY/ON OperationsTurning the Power On and Standby Mode To turn power to the unit onPress the Disc Selector 1 button Playing CDs using the CD Control Play pbuttonListening to CDs CD Changer Continuous PlaybackCDR Playback Operations Listening to CDsPress the CD or CDR button to select the deck Using the Remote Control to Control PlaybackTo stop CDR playback temporarily Removing a CD from the CDRTo select a two-digit track number Direct Playback of a Specific TrackForward and Reverse Search Press the number buttons of the track you want to playRepeat Playback Setting the repeat play modeUsing repeat mode during program or random play modes Skipping TracksCD Playback Pitch Control To release the random playback modeTo adjust the pitch of a CD during playback Random PlaybackRepeat steps 4 and 5 to program up to a maximum of 32 steps Programming Playback Using Main Unit ControlsLoad CDs into the trays of the 3-CD changer Press the SET button to start program registrationPress the SET button Programming Playback Using the Remote ControlPress the Play Mode button Press the CD Control Play p button to start programmed playPress the p button to start program play Repeat steps 5 and 6 to program up to a maximum of 32 stepsRead through this section before recording Add Finalize FeatureTo enable the Add Finalize feature Recording onto CD-R/RW DiscsTurn the Multi JOG to select High Press the SET button Recording onto CD-R/RW DiscsManual Recording To increase the recording level from LineAuto Track function on Press 1REC/REC Mute to put the CDR in recording pause modeWhen recording is complete To record silence in the recordingSynchronized Recording of 3-CD Changer Playback To add track marks automaticallyAuto Track function off Checking a track number during recording When ADD FINALIZE? is shown in the information windowSelect and stop the CD to be recorded To stop the recording at any timeInsert a recordable CD-R or CD-RW disc in the CDR disc tray When recording completesDisc Dubbing Select a disc and start playbackListening Edit Recording When the first track has been stored in memoryRecording process starts Program Edit RecordingLoad CDs in the 3-CD changer Load a recordable CD-R or CD-RW disc in the CDR traySelect and enter the disc number Select and enter a track numberRepeat steps 4 and 5 to continue programming tracks Pess the SET button Setting the Unit for High-speed RecordingSynchronized recording to the CDR from an external source Press the Synchro button main unit/remote controlSynchronized Recording from External Sources Start playing of the source unitLoad a recordable CD-R or CD-RW in the CDR disc tray Mixed Input RecordingMIX Balance Line Special Recording Edit Operations Skipping a Recorded Track on a CD-R or CD-RW Track SkipErasing a Track or Tracks Erase Function CD-RW only Special Recording Edit Operations Erasing All Tracks Disc Erase Function CD-RW onlyLoad the CD-RW to be erased in the CDR disc tray Press the Finalize button main unit/remote control Finalizing a DiscLoad a finalized CD-RW disc into the CDR disc tray Press the SET button again to confirm the operation 4 Cancel Resetting the Unit to Factory Default SettingsSetting the Clock Ways to change or adjust the time displayExample To ascertain the correct time Setting the ClockTimer Play wake-up play Timer OperationsFrom Standby Mode Timer OperationsSet the power to standby mode With Unit Power Turned OnLoad a recordable CD-R or CD-RW disc into the CDR Message Significance Remedy CD and CDR MessagesDisc Full CD and CDR MessagesScms Serial Copy Management System Common TroubleshootingSpecifications Product serviceProduct information

SL-PR300 specifications

The Panasonic SL-PR300 is a remarkable portable CD player that combines advanced technology with user-friendly features. Released during the height of the CD boom, it showcased Panasonic’s commitment to quality audio and innovative design in portable music solutions.

One of the standout features of the SL-PR300 is its compact and lightweight design, making it easy to carry for on-the-go listening. The player measures just under 1.5 inches thick, allowing it to fit comfortably into bags and backpacks, making it a popular choice for travel enthusiasts.

The SL-PR300 is equipped with a high-quality 1-bit Digital-to-Analog Converter (DAC), which ensures clear and precise sound reproduction. This technology enhances audio quality by reducing distortion and providing a more immersive listening experience. The player supports a range of CD formats, including standard audio CDs and CD-R/RW discs, making it versatile for various music collections.

One of the innovative features integrated into the SL-PR300 is the anti-shock technology, designed to minimize skips and interruptions during playback. This is particularly beneficial for users who enjoy listening while they move, providing a smooth experience even when walking or exercising.

Additionally, the SL-PR300 offers a rechargeable battery option, providing convenience and sustainability for music lovers. Users can easily recharge the player, reducing the need for disposable batteries and allowing extended listening sessions without interruption. The long battery life also ensures that users can enjoy their music without frequent recharging, perfect for long journeys or outdoor activities.

For ease of use, the SL-PR300 features an intuitive interface with simple controls, allowing users to navigate their playlists effortlessly. The large, easy-to-read LCD screen provides essential information such as track number and playback time, enhancing the overall user experience.

In terms of connectivity, the player includes a headphone jack, providing a direct and personal listening experience. The SL-PR300’s durable construction ensures it can withstand the rigors of daily use, making it a dependable choice for music enthusiasts looking for a reliable portable CD player.

In summary, the Panasonic SL-PR300 stands out in the portable audio market with its combination of advanced technology, user-friendly design, and portability. With features such as anti-shock technology, rechargeable battery options, and high-quality audio output, it remains a noteworthy choice for anyone looking to enjoy CDs on the go.
Top Page Image Contents