Panasonic SL-PR300 Listening Edit Recording, When the first track has been stored in memory

Page 29

Recording onto CD-R/RW Discs

“DISC DUBBING?” is shown in the information display.

•When a blank disc is in the CDR tray, “UPDATE OPC” is shown following “DISC DUBBING”.

The 3-CD changer and CDR start simultaneously.

• Recording starts from the first track of the CD.

When recording completes, “STOP DUBBING” flashes and recording automatically stops.

Notes

•Recording can only start if the total time of the tracks on the source disc is less than the time remaining on the disc being recorded to. If the track time on the source disc is longer, the message “SHORT REMAIN” is shown in the information dis- play and the dubbing function is ended.

•If a track on the source disc is of SCMS format, the message “SCMS PROTECT” is shown in the information display, and the dubbing function is ended.

•In the 1 Disc Dubbing mode, finalize the disc manually.

Listening Edit Recording

Selected tracks can be programmed and recorded.

“LISTEN EDIT” is shown in the information display for 3 seconds, the LISTENING EDIT edit recording indicator is shown in the dis- play window.

•The CD trays of the 3-CD changer cannot be opened once the listening edit mode is activated.

•If tracks have already been programmed for the CDs, “LAST L- PG OK?” is shown in the information display. Press the SET button on either the remote control or the main unit or press the PLAY button on the main unit to record the same programmed tracks.

Recording starts.

To program new tracks, press the CANCEL button and then proceed to step 4.

4 Program the tracks while the CD is playing by assigning a tag to each track on the disc.

• This is done by pressing either the SET button (main unit/ remote control) to add the track to the program or the CANCEL button (main unit/remote control) to skip the track.

a. When the track now playing is to be recorded

SET

 

 

 

3

 

 

 

COMPACT DISC RECORDER SL-PR300

POWER

 

 

 

 

PHONES

 

 

 

MIN

MAX

PLAY MODE

CD EDIT

CD REC

1

 

1

OPEN /

DISC

CLOSE

SELECTOR

DISC 3

3

DISC 2

2

DISC 1

1

2

 

 

MULTI JOG

 

 

REC LEVEL

OPEN /

–

+

CLOSE

DIGITAL

CD

LINE

 

 

REC SELECTOR

 

 

 

 

 

 

MIX BALANCE

 

 

 

 

 

LINE

CD

 

 

SYNCHRO

MENU

SET

CANCEL

 

FINALIZE

REC/

REC MUTE

4

5 CANCEL

The track is stored in the memory, and operation moves on to the next track.

b. When the track is not to be recorded

CANCEL

The track is not stored in the memory, and operation moves on to the next track.

When the first track has been stored in memory

1

DISC SELECTOR

 

 

CD1

CD2

CD3

 

3

CD REC

CD EDIT

FINALIZE

DISPLAY

 

1 2 3

 

4

5

 

6

 

7

8

 

9

 

0

>10

 

 

 

PLAY

REPEAT

CONTROL

 

MODE

CD

CD-R/RW

5

•REC

 

FADE

SYNCHRO

REC MUTE

 

 

 

1

 

 

 

 

 

SELECTOR

 

MENU

 

REC

 

 

 

PITCH+

SET

4

 

PITCH–

CANCEL

PITCH 0

CANCEL

COMPACT DISC RECORDER

RAK-PR300

1 Select and stop the CD to be recorded.

2 Load a recordable CD-R or CD-RW in the CDR tray.

• The disc is read.

3 Press the CD EDIT button (main unit/remote control) to select the Listening Edit mode.

Main Unit

 

Remote Control

 

 

 

CD EDIT

CD EDIT

 

 

 

 

 

 

 

Recording time remaining on the

Play time of second track

CD-R/RW disc (pre-calculated)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

3

4

5

 

 

 

 

 

 

 

 

 

 

 

 

 

CD PLAYER

 

 

SYNCHRO

LISTENING EDIT

6 7

8

9

10

DIGITAL

REC HIGH SPEED AUTO TRACK

CD REC

 

 

 

 

 

44.1kHz

CD-R

 

 

 

 

 

L–

 

40

 

30

 

20

 

15

10 6 3 0 dB

 

 

 

 

 

 

 

 

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

“1” is cleared from the music calendar.

After making the last programming choice, “START TO DUB?” is shown in the information display. Press the SET button (main unit/ remote control) to continue or the CANCEL button (main unit/ remote control) to end the function.

Note

•Up to 32 steps can be included in the programming. The same track cannot be programmed twice.

When there is not much recording time left on the CD-R or CD- RW disc, tracks that are longer than the remaining time (pre- calculated) can be programmed but “NO REM” is shown in the information display.

5 Press the CDR Control PLAY p or 1 REC/REC MUTE button on the main unit or the 1 REC/

REC MUTE button on the remote control. Recording of the selected songs will begin.

RQT6087

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Compact Disc Recorder Table of Contents Laser product label has not been attached to this product Listening CautionUser memo Features Handling precautions Storage precautionsConcerning CDs Do not place or store CDs in the following placesAnalog Connections ConnectionsDigital Connections ConnectionsDigital Optical and Coaxial Cable Connections Optical Cable Input/Output TerminalsMain Unit ComponentsPhones Level Volume Control Headphones JackRemote Control Sensor ComponentsDisplay Window Remote Control Using the Remote ControlInserting the Batteries Using the Remote ControlUsing the Remote Control Turning the Power On and Standby Mode Power STANDBY/ON OperationsTo turn power to the unit on To put the unit in standby mode during operationListening to CDs Playing CDs using the CD Control Play pbuttonCD Changer Continuous Playback Press the Disc Selector 1 buttonCDR Playback Operations Listening to CDsTo stop CDR playback temporarily Using the Remote Control to Control PlaybackRemoving a CD from the CDR Press the CD or CDR button to select the deckForward and Reverse Search Direct Playback of a Specific TrackPress the number buttons of the track you want to play To select a two-digit track numberUsing repeat mode during program or random play modes Setting the repeat play modeSkipping Tracks Repeat PlaybackTo adjust the pitch of a CD during playback To release the random playback modeRandom Playback CD Playback Pitch ControlLoad CDs into the trays of the 3-CD changer Programming Playback Using Main Unit ControlsPress the SET button to start program registration Repeat steps 4 and 5 to program up to a maximum of 32 stepsPress the Play Mode button Programming Playback Using the Remote ControlPress the CD Control Play p button to start programmed play Press the SET buttonPress the p button to start program play Repeat steps 5 and 6 to program up to a maximum of 32 stepsTo enable the Add Finalize feature Add Finalize FeatureRecording onto CD-R/RW Discs Read through this section before recordingManual Recording Recording onto CD-R/RW DiscsTo increase the recording level from Line Turn the Multi JOG to select High Press the SET buttonWhen recording is complete Press 1REC/REC Mute to put the CDR in recording pause modeTo record silence in the recording Auto Track function onAuto Track function off Synchronized Recording of 3-CD Changer PlaybackTo add track marks automatically Select and stop the CD to be recorded When ADD FINALIZE? is shown in the information windowTo stop the recording at any time Checking a track number during recordingDisc Dubbing When recording completesSelect a disc and start playback Insert a recordable CD-R or CD-RW disc in the CDR disc trayListening Edit Recording When the first track has been stored in memoryLoad CDs in the 3-CD changer Program Edit RecordingLoad a recordable CD-R or CD-RW disc in the CDR tray Recording process startsRepeat steps 4 and 5 to continue programming tracks Select and enter the disc numberSelect and enter a track number Pess the SET button Setting the Unit for High-speed RecordingSynchronized Recording from External Sources Press the Synchro button main unit/remote controlStart playing of the source unit Synchronized recording to the CDR from an external sourceLoad a recordable CD-R or CD-RW in the CDR disc tray Mixed Input RecordingMIX Balance Line Erasing a Track or Tracks Erase Function CD-RW only Special Recording Edit OperationsSkipping a Recorded Track on a CD-R or CD-RW Track Skip Load the CD-RW to be erased in the CDR disc tray Special Recording Edit OperationsErasing All Tracks Disc Erase Function CD-RW only Load a finalized CD-RW disc into the CDR disc tray Press the Finalize button main unit/remote controlFinalizing a Disc Press the SET button again to confirm the operation 4 Cancel Resetting the Unit to Factory Default SettingsExample Setting the ClockWays to change or adjust the time display To ascertain the correct time Setting the ClockTimer Play wake-up play Timer OperationsSet the power to standby mode Timer OperationsWith Unit Power Turned On From Standby ModeLoad a recordable CD-R or CD-RW disc into the CDR Message Significance Remedy CD and CDR MessagesDisc Full CD and CDR MessagesScms Serial Copy Management System Common TroubleshootingProduct information SpecificationsProduct service

SL-PR300 specifications

The Panasonic SL-PR300 is a remarkable portable CD player that combines advanced technology with user-friendly features. Released during the height of the CD boom, it showcased Panasonic’s commitment to quality audio and innovative design in portable music solutions.

One of the standout features of the SL-PR300 is its compact and lightweight design, making it easy to carry for on-the-go listening. The player measures just under 1.5 inches thick, allowing it to fit comfortably into bags and backpacks, making it a popular choice for travel enthusiasts.

The SL-PR300 is equipped with a high-quality 1-bit Digital-to-Analog Converter (DAC), which ensures clear and precise sound reproduction. This technology enhances audio quality by reducing distortion and providing a more immersive listening experience. The player supports a range of CD formats, including standard audio CDs and CD-R/RW discs, making it versatile for various music collections.

One of the innovative features integrated into the SL-PR300 is the anti-shock technology, designed to minimize skips and interruptions during playback. This is particularly beneficial for users who enjoy listening while they move, providing a smooth experience even when walking or exercising.

Additionally, the SL-PR300 offers a rechargeable battery option, providing convenience and sustainability for music lovers. Users can easily recharge the player, reducing the need for disposable batteries and allowing extended listening sessions without interruption. The long battery life also ensures that users can enjoy their music without frequent recharging, perfect for long journeys or outdoor activities.

For ease of use, the SL-PR300 features an intuitive interface with simple controls, allowing users to navigate their playlists effortlessly. The large, easy-to-read LCD screen provides essential information such as track number and playback time, enhancing the overall user experience.

In terms of connectivity, the player includes a headphone jack, providing a direct and personal listening experience. The SL-PR300’s durable construction ensures it can withstand the rigors of daily use, making it a dependable choice for music enthusiasts looking for a reliable portable CD player.

In summary, the Panasonic SL-PR300 stands out in the portable audio market with its combination of advanced technology, user-friendly design, and portability. With features such as anti-shock technology, rechargeable battery options, and high-quality audio output, it remains a noteworthy choice for anyone looking to enjoy CDs on the go.
Top Page Image Contents