Panasonic SL-PR300 Programming Playback Using the Remote Control, Press the Play Mode button

Page 21

Listening to CDs

7 Press the CD Control PLAY p button to start programmed play.

•During playback, the disc number, track number and play time of the track are shown in the information display.

•The numbers of the tracks that have been played are cleared from the music calendar. They are displayed again when pro- grammed play is completed.

•Operation stops automatically (and “STOP” is shown in the information display) when all of the programmed tracks have been played.

•If the CD Control PLAY p button is pressed at a specific step in a program, the programming function will end and playback will start from Step 01, not the step currently shown in the infor- mation display.

To clear a step (track) from the program

To erase a programmed track, turn the MULTI JOG Control while in the CD stop mode until the track you want to erase is shown in the information display. Press the CANCEL button to erase the track from the program. The step number for each track following the one erased is automatically reduced by one (i.e., steps are renumbered). To erase the entire program, press the CANCEL but- ton until “PG NO PROGRAM” is shown in the information dis- play.

To change the contents of the program

In the CD stop mode, press the SET button followed by the CAN- CEL button. Programmed tracks will be erased in the reverse order of when they were entered (starting from the last track pro- grammed). Press the CANCEL button twice to erase one track. Continue erasing in this manner until all of the tracks you wanted to remove are erased. Enter new tracks into the program by follow- ing programming steps 4 and 5.

To check the contents of the program

To check the tracks you have entered into the program, press the CD Control STOP s button, and use the MULTI JOG Control to review the programmed tracks. The program steps (PG S**) and track numbers will be shown in the information display one at a time as you toggle through the program (S: Step; **: step number).

To return to continuous playback

In the CD stop mode, repeatedly press the PLAY MODE button on the main unit until the total playing time is shown in the informa- tion display.

Main Unit

PLAY MODE

Programming Playback Using the Remote Control

If you want to program and record tracks, see “Program Edit Recording” on page 30.

DISC SELECTOR

CD1 CD2 CD3

CD REC CD EDIT FINALIZE DISPLAY

 

1

 

2

 

3

 

 

4

 

5

 

6

 

 

7

 

8

 

9

 

 

0

 

>10

 

 

 

3

PLAY

REPEAT

CONTROL

2

MODE

CD

CD-R/RW

•REC

 

FADE

SYNCHRO

REC MUTE

 

 

 

 

 

SELECTOR

 

 

MENU

 

 

REC

 

 

 

 

 

 

 

 

PITCH+

 

 

 

 

 

 

SET

 

 

4

 

 

 

PITCH–

 

 

PITCH 0

CANCEL

COMPACT DISC RECORDER

RAK-PR300

1 Load CDs into the trays of the 3-CD changer.

•Only tracks on the CDs loaded in the 3-CD changer can be reg- istered into the program.

Note

•To close a tray, press the 0 button for the tray number that is open. If you press the 0 button for a tray number other than that for the tray that is open, the program may not be played correctly.

2 Press the CD Deck Selection button to place the unit in the CD mode.

•The CD PLAYER indicator is shown in the display window.

3 Press the PLAY MODE button.

•The PROGRAM indicator is shown in the display window, and if no program has been registered, “PG NO PROGRAM” is shown in the information display.

4 Press the SET button.

•The information display will show the following.

Program step

Disc source

number

 

Track number

5 Select the disc source (CD tray) using the R (reverse) or F (forward) buttons, and then press the SET button.

1.Select the disc source.

SET

2. Enter the selection.

CD1 CD2CD3

•When the SET button is pressed, next the program step and track number columns will flash.

(Continued on the next page)

RQT6087

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Compact Disc Recorder Table of Contents Listening Caution User memoLaser product label has not been attached to this product Features Handling precautions Storage precautionsConcerning CDs Do not place or store CDs in the following placesAnalog Connections ConnectionsDigital Connections ConnectionsDigital Optical and Coaxial Cable Connections Optical Cable Input/Output TerminalsMain Unit ComponentsPhones Level Volume Control Headphones JackRemote Control Sensor ComponentsDisplay Window Remote Control Using the Remote ControlUsing the Remote Control Using the Remote ControlInserting the Batteries Turning the Power On and Standby Mode Power STANDBY/ON OperationsTo turn power to the unit on To put the unit in standby mode during operationListening to CDs Playing CDs using the CD Control Play pbuttonCD Changer Continuous Playback Press the Disc Selector 1 buttonCDR Playback Operations Listening to CDsTo stop CDR playback temporarily Using the Remote Control to Control PlaybackRemoving a CD from the CDR Press the CD or CDR button to select the deckForward and Reverse Search Direct Playback of a Specific TrackPress the number buttons of the track you want to play To select a two-digit track numberUsing repeat mode during program or random play modes Setting the repeat play modeSkipping Tracks Repeat PlaybackTo adjust the pitch of a CD during playback To release the random playback modeRandom Playback CD Playback Pitch ControlLoad CDs into the trays of the 3-CD changer Programming Playback Using Main Unit ControlsPress the SET button to start program registration Repeat steps 4 and 5 to program up to a maximum of 32 stepsPress the Play Mode button Programming Playback Using the Remote ControlPress the CD Control Play p button to start programmed play Press the SET buttonPress the p button to start program play Repeat steps 5 and 6 to program up to a maximum of 32 stepsTo enable the Add Finalize feature Add Finalize FeatureRecording onto CD-R/RW Discs Read through this section before recordingManual Recording Recording onto CD-R/RW DiscsTo increase the recording level from Line Turn the Multi JOG to select High Press the SET buttonWhen recording is complete Press 1REC/REC Mute to put the CDR in recording pause modeTo record silence in the recording Auto Track function onSynchronized Recording of 3-CD Changer Playback To add track marks automaticallyAuto Track function off Select and stop the CD to be recorded When ADD FINALIZE? is shown in the information windowTo stop the recording at any time Checking a track number during recordingDisc Dubbing When recording completesSelect a disc and start playback Insert a recordable CD-R or CD-RW disc in the CDR disc trayListening Edit Recording When the first track has been stored in memoryLoad CDs in the 3-CD changer Program Edit RecordingLoad a recordable CD-R or CD-RW disc in the CDR tray Recording process startsSelect and enter the disc number Select and enter a track numberRepeat steps 4 and 5 to continue programming tracks Pess the SET button Setting the Unit for High-speed RecordingSynchronized Recording from External Sources Press the Synchro button main unit/remote controlStart playing of the source unit Synchronized recording to the CDR from an external sourceLoad a recordable CD-R or CD-RW in the CDR disc tray Mixed Input RecordingMIX Balance Line Special Recording Edit Operations Skipping a Recorded Track on a CD-R or CD-RW Track SkipErasing a Track or Tracks Erase Function CD-RW only Special Recording Edit Operations Erasing All Tracks Disc Erase Function CD-RW onlyLoad the CD-RW to be erased in the CDR disc tray Press the Finalize button main unit/remote control Finalizing a DiscLoad a finalized CD-RW disc into the CDR disc tray Press the SET button again to confirm the operation 4 Cancel Resetting the Unit to Factory Default SettingsSetting the Clock Ways to change or adjust the time displayExample To ascertain the correct time Setting the ClockTimer Play wake-up play Timer OperationsSet the power to standby mode Timer OperationsWith Unit Power Turned On From Standby ModeLoad a recordable CD-R or CD-RW disc into the CDR Message Significance Remedy CD and CDR MessagesDisc Full CD and CDR MessagesScms Serial Copy Management System Common TroubleshootingSpecifications Product serviceProduct information

SL-PR300 specifications

The Panasonic SL-PR300 is a remarkable portable CD player that combines advanced technology with user-friendly features. Released during the height of the CD boom, it showcased Panasonic’s commitment to quality audio and innovative design in portable music solutions.

One of the standout features of the SL-PR300 is its compact and lightweight design, making it easy to carry for on-the-go listening. The player measures just under 1.5 inches thick, allowing it to fit comfortably into bags and backpacks, making it a popular choice for travel enthusiasts.

The SL-PR300 is equipped with a high-quality 1-bit Digital-to-Analog Converter (DAC), which ensures clear and precise sound reproduction. This technology enhances audio quality by reducing distortion and providing a more immersive listening experience. The player supports a range of CD formats, including standard audio CDs and CD-R/RW discs, making it versatile for various music collections.

One of the innovative features integrated into the SL-PR300 is the anti-shock technology, designed to minimize skips and interruptions during playback. This is particularly beneficial for users who enjoy listening while they move, providing a smooth experience even when walking or exercising.

Additionally, the SL-PR300 offers a rechargeable battery option, providing convenience and sustainability for music lovers. Users can easily recharge the player, reducing the need for disposable batteries and allowing extended listening sessions without interruption. The long battery life also ensures that users can enjoy their music without frequent recharging, perfect for long journeys or outdoor activities.

For ease of use, the SL-PR300 features an intuitive interface with simple controls, allowing users to navigate their playlists effortlessly. The large, easy-to-read LCD screen provides essential information such as track number and playback time, enhancing the overall user experience.

In terms of connectivity, the player includes a headphone jack, providing a direct and personal listening experience. The SL-PR300’s durable construction ensures it can withstand the rigors of daily use, making it a dependable choice for music enthusiasts looking for a reliable portable CD player.

In summary, the Panasonic SL-PR300 stands out in the portable audio market with its combination of advanced technology, user-friendly design, and portability. With features such as anti-shock technology, rechargeable battery options, and high-quality audio output, it remains a noteworthy choice for anyone looking to enjoy CDs on the go.
Top Page Image Contents