Panasonic SL-PR300 Select and enter the disc number, Select and enter a track number

Page 31

Recording onto CD-R/RW Discs

If tracks have already been programmed for the CDs, “LAST P-PG OK?” is shown in the information display. Press the SET button on either the remote control or the main unit or press the PLAY button on the main unit to record the same programmed tracks.

Recording starts.

To program new tracks, press the CANCEL button and then pro- ceed to step 4.

•If you press the CANCEL button, the playing time remaining time on the CD-R or CD-RW disc in the CDR is shown in the information display.

4 Select and enter the disc number.

MULTI JOG

 

REC LEVEL

SET

–

+

1. Select the disc.

2. Enter the selection.

•The disc source can be selected using the MULTI JOG control on the main unit or the R/F buttons on the remote con- trol.

•When the SET button (main unit/remote control) is pressed, the programming and track numbers shown in the information dis- play start flashing.

5 Select and enter a track number.

MULTI JOG

REC LEVEL

SET

– +

1. Select the track.

2. Enter the selection.

•After the track is entered, the amount of time remaining on the CD-R or CD-RW disc is shown in the information display.

6 Repeat steps 4 and 5 to continue programming tracks.

•Up to 32 steps can be programmed. The same track may be pro- grammed more than once.

•Programming ends when 32 steps have been registered or if there is no more time remaining on the CD-R or CD-RW.

7 Press the CDR Control PLAY p or 1 REC/REC MUTE button on the main unit or the 1REC/REC

MUTE button on the remote control.

When “ADD FINALIZE?” is shown in the information window:

•No response (no input) assumes that finalization is to be per- formed, or you can press the SET button (main unit/remote con- trol) to confirm that finalization is to be done. Press the CANCEL button (main unit/remote control) to keep the disc unfinalized.

Note

•This message will not be shown if the menu FINALIZE func- tion setting is “ON”. The default setting is “OFF”.

When a blank disc is in the CDR tray, “UPDATE OPC” is shown following “ADD FINALIZE?”.

The recording process starts.

•Only the tracks selected from the CDs in the 3-CD changer are recorded.

•Playback starts from the first track selected. The playing time of the track and the remaining playing time of the CD-R or CD- RW disc are shown in the information display.

•As high-speed recording is performed (CD-R 4x, CD-RW 2x), there is no audio output during the recording process.

When recording completes

“STOP DUBBING” flashes and recording automatically stops.

When recorded without canceling "ADD FINALIZE?"

“FINALIZE” is shown in the information window after recording is stopped and finalization is automatically performed.

To stop the recording at any time

Press the CD Control STOP sor CDR Control STOP sbutton on the main unit or the s (stop) button on the remote control to stop the recording process. The recording mode is released after “STOP DUBBING” is shown in the information display.

RQT6087

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Compact Disc Recorder Table of Contents User memo Listening CautionLaser product label has not been attached to this product Features Do not place or store CDs in the following places Storage precautionsHandling precautions Concerning CDsAnalog Connections ConnectionsOptical Cable Input/Output Terminals ConnectionsDigital Connections Digital Optical and Coaxial Cable ConnectionsMain Unit ComponentsComponents Headphones JackPhones Level Volume Control Remote Control SensorDisplay Window Remote Control Using the Remote ControlUsing the Remote Control Using the Remote ControlInserting the Batteries To put the unit in standby mode during operation Power STANDBY/ON OperationsTurning the Power On and Standby Mode To turn power to the unit onPress the Disc Selector 1 button Playing CDs using the CD Control Play pbuttonListening to CDs CD Changer Continuous PlaybackCDR Playback Operations Listening to CDsPress the CD or CDR button to select the deck Using the Remote Control to Control PlaybackTo stop CDR playback temporarily Removing a CD from the CDRTo select a two-digit track number Direct Playback of a Specific TrackForward and Reverse Search Press the number buttons of the track you want to playRepeat Playback Setting the repeat play modeUsing repeat mode during program or random play modes Skipping TracksCD Playback Pitch Control To release the random playback modeTo adjust the pitch of a CD during playback Random PlaybackRepeat steps 4 and 5 to program up to a maximum of 32 steps Programming Playback Using Main Unit ControlsLoad CDs into the trays of the 3-CD changer Press the SET button to start program registrationPress the SET button Programming Playback Using the Remote ControlPress the Play Mode button Press the CD Control Play p button to start programmed playPress the p button to start program play Repeat steps 5 and 6 to program up to a maximum of 32 stepsRead through this section before recording Add Finalize FeatureTo enable the Add Finalize feature Recording onto CD-R/RW DiscsTurn the Multi JOG to select High Press the SET button Recording onto CD-R/RW DiscsManual Recording To increase the recording level from LineAuto Track function on Press 1REC/REC Mute to put the CDR in recording pause modeWhen recording is complete To record silence in the recordingTo add track marks automatically Synchronized Recording of 3-CD Changer PlaybackAuto Track function off Checking a track number during recording When ADD FINALIZE? is shown in the information windowSelect and stop the CD to be recorded To stop the recording at any timeInsert a recordable CD-R or CD-RW disc in the CDR disc tray When recording completesDisc Dubbing Select a disc and start playbackListening Edit Recording When the first track has been stored in memoryRecording process starts Program Edit RecordingLoad CDs in the 3-CD changer Load a recordable CD-R or CD-RW disc in the CDR traySelect and enter a track number Select and enter the disc numberRepeat steps 4 and 5 to continue programming tracks Pess the SET button Setting the Unit for High-speed RecordingSynchronized recording to the CDR from an external source Press the Synchro button main unit/remote controlSynchronized Recording from External Sources Start playing of the source unitLoad a recordable CD-R or CD-RW in the CDR disc tray Mixed Input RecordingMIX Balance Line Skipping a Recorded Track on a CD-R or CD-RW Track Skip Special Recording Edit OperationsErasing a Track or Tracks Erase Function CD-RW only Erasing All Tracks Disc Erase Function CD-RW only Special Recording Edit OperationsLoad the CD-RW to be erased in the CDR disc tray Finalizing a Disc Press the Finalize button main unit/remote controlLoad a finalized CD-RW disc into the CDR disc tray Press the SET button again to confirm the operation 4 Cancel Resetting the Unit to Factory Default SettingsWays to change or adjust the time display Setting the ClockExample To ascertain the correct time Setting the ClockTimer Play wake-up play Timer OperationsFrom Standby Mode Timer OperationsSet the power to standby mode With Unit Power Turned OnLoad a recordable CD-R or CD-RW disc into the CDR Message Significance Remedy CD and CDR MessagesDisc Full CD and CDR MessagesScms Serial Copy Management System Common TroubleshootingProduct service SpecificationsProduct information

SL-PR300 specifications

The Panasonic SL-PR300 is a remarkable portable CD player that combines advanced technology with user-friendly features. Released during the height of the CD boom, it showcased Panasonic’s commitment to quality audio and innovative design in portable music solutions.

One of the standout features of the SL-PR300 is its compact and lightweight design, making it easy to carry for on-the-go listening. The player measures just under 1.5 inches thick, allowing it to fit comfortably into bags and backpacks, making it a popular choice for travel enthusiasts.

The SL-PR300 is equipped with a high-quality 1-bit Digital-to-Analog Converter (DAC), which ensures clear and precise sound reproduction. This technology enhances audio quality by reducing distortion and providing a more immersive listening experience. The player supports a range of CD formats, including standard audio CDs and CD-R/RW discs, making it versatile for various music collections.

One of the innovative features integrated into the SL-PR300 is the anti-shock technology, designed to minimize skips and interruptions during playback. This is particularly beneficial for users who enjoy listening while they move, providing a smooth experience even when walking or exercising.

Additionally, the SL-PR300 offers a rechargeable battery option, providing convenience and sustainability for music lovers. Users can easily recharge the player, reducing the need for disposable batteries and allowing extended listening sessions without interruption. The long battery life also ensures that users can enjoy their music without frequent recharging, perfect for long journeys or outdoor activities.

For ease of use, the SL-PR300 features an intuitive interface with simple controls, allowing users to navigate their playlists effortlessly. The large, easy-to-read LCD screen provides essential information such as track number and playback time, enhancing the overall user experience.

In terms of connectivity, the player includes a headphone jack, providing a direct and personal listening experience. The SL-PR300’s durable construction ensures it can withstand the rigors of daily use, making it a dependable choice for music enthusiasts looking for a reliable portable CD player.

In summary, the Panasonic SL-PR300 stands out in the portable audio market with its combination of advanced technology, user-friendly design, and portability. With features such as anti-shock technology, rechargeable battery options, and high-quality audio output, it remains a noteworthy choice for anyone looking to enjoy CDs on the go.
Top Page Image Contents