Panasonic SL-PR300 operating instructions Special Recording Edit Operations

Page 37

Special Recording Edit Operations

4 Press the SET button (main unit/remote control).

•“ERASE (start track) – (last track)?” is flashed in the informa- tion display. (Initially, the start track and last track are both the last track number recorded on the CD-RW.)

•Press the CANCEL button (main unit/remote control) if you do not wish to perform this procedure.

5 If needed, use the MULTI JOG control or press the P/p(menu) button on the remote control to select the number of tracks you want to erase preceding the last track.

•Please note that all tracks following the start track will be erased. For example, when track 8 on an 11 track CD-RW is assigned as the start track, tracks 8, 9, 10, and 11 will be erased.

6 Press the SET button (main unit/remote control).

•“ERASE TRACK” is flashed in the information display, the selected tracks are erased, and the normal display is shown when erasing has been completed.

•Each track that was erased is cleared from the music calendar.

•Tracks can only be erased starting from the last track recorded on a disc.

Notes

•Once a track is erased, the recording cannot be restored.

•Do not turn the power off, disconnect the AC power cord from the wall outlet or subject the unit to vibration during the erase operation. Doing so may ruin the CD-RW disc.

Erasing All Tracks (Disc Erase Function) (CD-RW only)

The Disc Erase function is used to erase the entire contents of the CD-RW. This unit uses a unique high-speed (2x) erasing function that is different from normal erasure procedures. Erasing is per- formed all the way through the disc’s TOC (Table of Contents). “ERASE DISC” flashes in the information display during the eras- ing process.

Note

•If the disc is damaged or there is disc related trouble, this func- tion may not be possible.

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MULTI JOG

3

 

 

COMPACT DISC RECORDER SL-PR300

 

 

 

 

 

 

 

REC LEVEL

POWER

 

 

 

OPEN /

DISC

 

 

 

 

 

 

–

+

 

 

 

CLOSE

SELECTOR

 

 

 

 

 

OPEN /

 

 

 

 

DISC 3

3

 

 

 

 

 

CLOSE

 

 

 

 

 

 

DISC 2

2

DIGITAL

CD

LINE

 

 

REC SELECTOR

 

 

PHONES

 

 

DISC 1

1

 

 

 

 

 

 

MIX BALANCE

 

MIN

MAX

 

 

 

 

 

 

 

 

 

 

LINE

CD

 

PLAY MODE

CD EDIT

CD REC

 

 

 

SYNCHRO

MENU

SET

CANCEL

 

 

 

 

 

 

 

 

 

 

 

FINALIZE

 

 

REC/

 

 

 

 

 

 

 

 

 

 

 

 

 

REC MUTE

 

 

 

2 4,5 CANCEL

DISC SELECTOR

CD1

CD2

CD3

CD REC

CD EDIT

FINALIZE DISPLAY

 

1

2

 

3

 

4

5

 

6

 

7

8

 

9

 

0

>10

 

 

 

PLAY

REPEAT

CONTROL

 

MODE

CD

CD-R/RW

3

•REC

 

FADE

SYNCHRO

REC MUTE

 

 

 

SELECTOR

MENU

2

REC

 

 

 

PITCH+

4,5

 

SET

 

PITCH–

 

PITCH 0

CANCEL

CANCEL

 

 

COMPACT DISC RECORDER

 

 

RAK-PR300

 

1 Load the CD-RW to be erased in the CDR disc tray.

•The number of tracks and play time are shown in the informa- tion display.

2 When the unit is in the stop mode, press the MENU button (main unit/remote control).

3 Turn the MULTI JOG control or press the R/F

(menu) button on the remote control until “DISC ERASE” is shown in the information display.

4 Press the SET button (main unit/remote control).

•“ERASE DISC?” is shown in the information display.

•Press the CANCEL button (main unit/remote control) if you do not wish to perform this procedure.

5 Press the Set button (main unit/remote control).

•Full disc erasure takes a few minutes to perform. During the procedure, the length of the level meter is used to indicate approximately how much time is remaining until erasure is complete. When the erasure has been completed, the normal

display is shown.

RQT6087

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Compact Disc Recorder Table of Contents User memo Listening CautionLaser product label has not been attached to this product Features Handling precautions Storage precautionsConcerning CDs Do not place or store CDs in the following placesAnalog Connections ConnectionsDigital Connections ConnectionsDigital Optical and Coaxial Cable Connections Optical Cable Input/Output TerminalsMain Unit ComponentsPhones Level Volume Control Headphones JackRemote Control Sensor ComponentsDisplay Window Remote Control Using the Remote ControlUsing the Remote Control Using the Remote ControlInserting the Batteries Turning the Power On and Standby Mode Power STANDBY/ON OperationsTo turn power to the unit on To put the unit in standby mode during operationListening to CDs Playing CDs using the CD Control Play pbuttonCD Changer Continuous Playback Press the Disc Selector 1 buttonCDR Playback Operations Listening to CDsTo stop CDR playback temporarily Using the Remote Control to Control PlaybackRemoving a CD from the CDR Press the CD or CDR button to select the deckForward and Reverse Search Direct Playback of a Specific TrackPress the number buttons of the track you want to play To select a two-digit track numberUsing repeat mode during program or random play modes Setting the repeat play modeSkipping Tracks Repeat PlaybackTo adjust the pitch of a CD during playback To release the random playback modeRandom Playback CD Playback Pitch ControlLoad CDs into the trays of the 3-CD changer Programming Playback Using Main Unit ControlsPress the SET button to start program registration Repeat steps 4 and 5 to program up to a maximum of 32 stepsPress the Play Mode button Programming Playback Using the Remote ControlPress the CD Control Play p button to start programmed play Press the SET buttonPress the p button to start program play Repeat steps 5 and 6 to program up to a maximum of 32 stepsTo enable the Add Finalize feature Add Finalize FeatureRecording onto CD-R/RW Discs Read through this section before recordingManual Recording Recording onto CD-R/RW DiscsTo increase the recording level from Line Turn the Multi JOG to select High Press the SET buttonWhen recording is complete Press 1REC/REC Mute to put the CDR in recording pause modeTo record silence in the recording Auto Track function onTo add track marks automatically Synchronized Recording of 3-CD Changer PlaybackAuto Track function off Select and stop the CD to be recorded When ADD FINALIZE? is shown in the information windowTo stop the recording at any time Checking a track number during recordingDisc Dubbing When recording completesSelect a disc and start playback Insert a recordable CD-R or CD-RW disc in the CDR disc trayListening Edit Recording When the first track has been stored in memoryLoad CDs in the 3-CD changer Program Edit RecordingLoad a recordable CD-R or CD-RW disc in the CDR tray Recording process startsSelect and enter a track number Select and enter the disc numberRepeat steps 4 and 5 to continue programming tracks Pess the SET button Setting the Unit for High-speed RecordingSynchronized Recording from External Sources Press the Synchro button main unit/remote controlStart playing of the source unit Synchronized recording to the CDR from an external sourceLoad a recordable CD-R or CD-RW in the CDR disc tray Mixed Input RecordingMIX Balance Line Skipping a Recorded Track on a CD-R or CD-RW Track Skip Special Recording Edit OperationsErasing a Track or Tracks Erase Function CD-RW only Erasing All Tracks Disc Erase Function CD-RW only Special Recording Edit OperationsLoad the CD-RW to be erased in the CDR disc tray Finalizing a Disc Press the Finalize button main unit/remote controlLoad a finalized CD-RW disc into the CDR disc tray Press the SET button again to confirm the operation 4 Cancel Resetting the Unit to Factory Default SettingsWays to change or adjust the time display Setting the ClockExample To ascertain the correct time Setting the ClockTimer Play wake-up play Timer OperationsSet the power to standby mode Timer OperationsWith Unit Power Turned On From Standby ModeLoad a recordable CD-R or CD-RW disc into the CDR Message Significance Remedy CD and CDR MessagesDisc Full CD and CDR MessagesScms Serial Copy Management System Common TroubleshootingProduct service SpecificationsProduct information

SL-PR300 specifications

The Panasonic SL-PR300 is a remarkable portable CD player that combines advanced technology with user-friendly features. Released during the height of the CD boom, it showcased Panasonic’s commitment to quality audio and innovative design in portable music solutions.

One of the standout features of the SL-PR300 is its compact and lightweight design, making it easy to carry for on-the-go listening. The player measures just under 1.5 inches thick, allowing it to fit comfortably into bags and backpacks, making it a popular choice for travel enthusiasts.

The SL-PR300 is equipped with a high-quality 1-bit Digital-to-Analog Converter (DAC), which ensures clear and precise sound reproduction. This technology enhances audio quality by reducing distortion and providing a more immersive listening experience. The player supports a range of CD formats, including standard audio CDs and CD-R/RW discs, making it versatile for various music collections.

One of the innovative features integrated into the SL-PR300 is the anti-shock technology, designed to minimize skips and interruptions during playback. This is particularly beneficial for users who enjoy listening while they move, providing a smooth experience even when walking or exercising.

Additionally, the SL-PR300 offers a rechargeable battery option, providing convenience and sustainability for music lovers. Users can easily recharge the player, reducing the need for disposable batteries and allowing extended listening sessions without interruption. The long battery life also ensures that users can enjoy their music without frequent recharging, perfect for long journeys or outdoor activities.

For ease of use, the SL-PR300 features an intuitive interface with simple controls, allowing users to navigate their playlists effortlessly. The large, easy-to-read LCD screen provides essential information such as track number and playback time, enhancing the overall user experience.

In terms of connectivity, the player includes a headphone jack, providing a direct and personal listening experience. The SL-PR300’s durable construction ensures it can withstand the rigors of daily use, making it a dependable choice for music enthusiasts looking for a reliable portable CD player.

In summary, the Panasonic SL-PR300 stands out in the portable audio market with its combination of advanced technology, user-friendly design, and portability. With features such as anti-shock technology, rechargeable battery options, and high-quality audio output, it remains a noteworthy choice for anyone looking to enjoy CDs on the go.
Top Page Image Contents