Panasonic SL-PR300 operating instructions CD and CDR Messages, Disc Full

Page 47

CD and CDR Messages

Message

Significance

Remedy

 

 

 

NO R/RW DISC

The disc inserted is a CD for computer data.

Check to see if the CD-ROM is recorded in

 

Recording and erase functions are not pos-

audio format. If not, replace with a disc

 

sible.

recorded using the CD-DA format.

 

 

 

DISC FULL

The CD-R or CD-RW has no available time.

Replace with another recordable CD-R or

 

 

CD-RW. Finalization of the disc is recom-

 

 

mended.

 

 

 

TNO FULL

99 tracks have been recorded on the disc.

Finalize the disc. Replace the disc to per-

 

Further recording is not possible.

form further recording.

 

 

 

CANNOT REC

Recording is not possible. This may be

Check connections and/or replace the disc.

 

caused by poor connections or disc trouble.

 

 

 

 

UNLOCK

When performing digital recording of an

Check the connection between the compo-

 

external component, the digital signal from

nent and this unit and confirm that the digi-

 

the component is not being sent or the sig-

tal signal being output from the component

 

nal being sent cannot be recorded by this

is compatible with this unit.

 

unit.

 

 

 

 

SCMS PROTECT

In accordance with SCMS regulations, digi-

Switch the source selection to select input

 

tal recording cannot be performed.

from the analog connections, and perform

 

 

analog recording.

 

 

 

NOT AUDIO IN

The digital signal is not an audio format.

Set the source component to output a digital

 

 

audio signal. For example, if a data track on

 

 

a CD is selected, switch to a track that con-

 

 

tains audio data.

 

 

 

NOT REC MUTE

The 1 REC/REC MUTE button has been

See page 25 for information on when the

 

pressed at a time when the function cannot

muting function can be used, and press the

 

be performed.

1 REC/REC MUTE button when the func-

 

 

tion can be performed.

 

 

 

SHORT REMAIN

Not enough time remains on the disc to con-

Replace the disc with a disc that contains

 

tinue synchronized recording from the 3-

sufficient recording time.

 

CD changer to the CDR.

 

 

 

 

CANNOT FIN

Trouble with the CD-RW has prevented

Replace the disc.

 

finalization from being performed.

 

 

 

 

NO RW DISC

A CD-RW has not been inserted. Erase and

 

 

Unfinalize functions are not possible.

 

 

 

 

CANNOT ERASE

Trouble with the CD-RW has prevented an

Replace the disc.

 

erase function from being performed.

 

 

 

 

CANNOT UNFIN

Trouble with the CD-RW has prevented the

Replace the disc.

 

Unfinalize function from being performed.

 

 

 

 

DAO DISC

The Unfinalize function cannot be per-

 

 

formed with discs recorded using the

 

 

“DISC at Once” recording system.

 

 

 

 

SKIP FULL

The maximum number of 21 tracks on the

 

 

disc that can be skipped has been reached.

 

 

Skip marking more than 21 tracks is not

 

 

possible with this unit.

 

 

 

 

RQT6087

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Compact Disc Recorder Table of Contents Laser product label has not been attached to this product Listening CautionUser memo Features Do not place or store CDs in the following places Storage precautionsHandling precautions Concerning CDsAnalog Connections ConnectionsOptical Cable Input/Output Terminals ConnectionsDigital Connections Digital Optical and Coaxial Cable ConnectionsMain Unit ComponentsComponents Headphones JackPhones Level Volume Control Remote Control SensorDisplay Window Remote Control Using the Remote ControlInserting the Batteries Using the Remote ControlUsing the Remote Control To put the unit in standby mode during operation Power STANDBY/ON OperationsTurning the Power On and Standby Mode To turn power to the unit onPress the Disc Selector 1 button Playing CDs using the CD Control Play pbuttonListening to CDs CD Changer Continuous PlaybackCDR Playback Operations Listening to CDsPress the CD or CDR button to select the deck Using the Remote Control to Control PlaybackTo stop CDR playback temporarily Removing a CD from the CDRTo select a two-digit track number Direct Playback of a Specific TrackForward and Reverse Search Press the number buttons of the track you want to playRepeat Playback Setting the repeat play modeUsing repeat mode during program or random play modes Skipping TracksCD Playback Pitch Control To release the random playback modeTo adjust the pitch of a CD during playback Random PlaybackRepeat steps 4 and 5 to program up to a maximum of 32 steps Programming Playback Using Main Unit ControlsLoad CDs into the trays of the 3-CD changer Press the SET button to start program registrationPress the SET button Programming Playback Using the Remote ControlPress the Play Mode button Press the CD Control Play p button to start programmed playPress the p button to start program play Repeat steps 5 and 6 to program up to a maximum of 32 stepsRead through this section before recording Add Finalize FeatureTo enable the Add Finalize feature Recording onto CD-R/RW DiscsTurn the Multi JOG to select High Press the SET button Recording onto CD-R/RW DiscsManual Recording To increase the recording level from LineAuto Track function on Press 1REC/REC Mute to put the CDR in recording pause modeWhen recording is complete To record silence in the recordingAuto Track function off Synchronized Recording of 3-CD Changer PlaybackTo add track marks automatically Checking a track number during recording When ADD FINALIZE? is shown in the information windowSelect and stop the CD to be recorded To stop the recording at any timeInsert a recordable CD-R or CD-RW disc in the CDR disc tray When recording completesDisc Dubbing Select a disc and start playbackListening Edit Recording When the first track has been stored in memoryRecording process starts Program Edit RecordingLoad CDs in the 3-CD changer Load a recordable CD-R or CD-RW disc in the CDR trayRepeat steps 4 and 5 to continue programming tracks Select and enter the disc numberSelect and enter a track number Pess the SET button Setting the Unit for High-speed RecordingSynchronized recording to the CDR from an external source Press the Synchro button main unit/remote controlSynchronized Recording from External Sources Start playing of the source unitLoad a recordable CD-R or CD-RW in the CDR disc tray Mixed Input RecordingMIX Balance Line Erasing a Track or Tracks Erase Function CD-RW only Special Recording Edit OperationsSkipping a Recorded Track on a CD-R or CD-RW Track Skip Load the CD-RW to be erased in the CDR disc tray Special Recording Edit OperationsErasing All Tracks Disc Erase Function CD-RW only Load a finalized CD-RW disc into the CDR disc tray Press the Finalize button main unit/remote controlFinalizing a Disc Press the SET button again to confirm the operation 4 Cancel Resetting the Unit to Factory Default SettingsExample Setting the ClockWays to change or adjust the time display To ascertain the correct time Setting the ClockTimer Play wake-up play Timer OperationsFrom Standby Mode Timer OperationsSet the power to standby mode With Unit Power Turned OnLoad a recordable CD-R or CD-RW disc into the CDR Message Significance Remedy CD and CDR MessagesDisc Full CD and CDR MessagesScms Serial Copy Management System Common TroubleshootingProduct information SpecificationsProduct service

SL-PR300 specifications

The Panasonic SL-PR300 is a remarkable portable CD player that combines advanced technology with user-friendly features. Released during the height of the CD boom, it showcased Panasonic’s commitment to quality audio and innovative design in portable music solutions.

One of the standout features of the SL-PR300 is its compact and lightweight design, making it easy to carry for on-the-go listening. The player measures just under 1.5 inches thick, allowing it to fit comfortably into bags and backpacks, making it a popular choice for travel enthusiasts.

The SL-PR300 is equipped with a high-quality 1-bit Digital-to-Analog Converter (DAC), which ensures clear and precise sound reproduction. This technology enhances audio quality by reducing distortion and providing a more immersive listening experience. The player supports a range of CD formats, including standard audio CDs and CD-R/RW discs, making it versatile for various music collections.

One of the innovative features integrated into the SL-PR300 is the anti-shock technology, designed to minimize skips and interruptions during playback. This is particularly beneficial for users who enjoy listening while they move, providing a smooth experience even when walking or exercising.

Additionally, the SL-PR300 offers a rechargeable battery option, providing convenience and sustainability for music lovers. Users can easily recharge the player, reducing the need for disposable batteries and allowing extended listening sessions without interruption. The long battery life also ensures that users can enjoy their music without frequent recharging, perfect for long journeys or outdoor activities.

For ease of use, the SL-PR300 features an intuitive interface with simple controls, allowing users to navigate their playlists effortlessly. The large, easy-to-read LCD screen provides essential information such as track number and playback time, enhancing the overall user experience.

In terms of connectivity, the player includes a headphone jack, providing a direct and personal listening experience. The SL-PR300’s durable construction ensures it can withstand the rigors of daily use, making it a dependable choice for music enthusiasts looking for a reliable portable CD player.

In summary, the Panasonic SL-PR300 stands out in the portable audio market with its combination of advanced technology, user-friendly design, and portability. With features such as anti-shock technology, rechargeable battery options, and high-quality audio output, it remains a noteworthy choice for anyone looking to enjoy CDs on the go.
Top Page Image Contents