Panasonic SL-PR300 Program Edit Recording, Load CDs in the 3-CD changer, Recording process starts

Page 30

Recording onto CD-R/RW Discs

When “ADD FINALIZE?” is shown in the information window:

•No response (no input) assumes that finalization is to be per- formed, or you can press the SET button (main unit/remote con- trol) to confirm that finalization is to be done. Press the CANCEL button (main unit/remote control) to keep the disc unfinalized.

Notes

•This message will be shown if the menu FINALIZE function setting is “ON”. The default setting is “OFF”.

•When a blank disc is in the CDR tray, “UPDATE OPC” is shown following “ADD FINALIZE?”.

The recording process starts.

•Only the tracks selected from the CDs in the 3-CD changer are recorded.

•Playback starts from the first track selected. The playing time of the track and the remaining playing time of the CD-R or CD- RW disc are shown in the information display.

•As high-speed recording is performed (CD-R 4x, CD-RW 2x), there is no audio output during the recording process.

When recording completes

“STOP DUBBING” flashes and recording automatically stops.

When recorded without canceling “ADD FINALIZE?”

“FINALIZE” is shown in the information window after recording is stopped and finalization is automatically performed.

To stop the recording at any time

Press the CD Control STOP sor CDR Control STOP sbutton on the main unit or the s (stop) button on the remote control to stop the recording process. The recording mode is released after “STOP DUBBING” is shown in the information display.

Notes

•There is no need to adjust the recording level when recording a digital signal.

•The last program information (the most recently created pro- gram still stored in the unit's memory) will be erased if the trays of the 3-CD changer are opened.

Program Edit Recording

This type of recording allows you to make a program of your favor- ite tracks on any of the CDs loaded in the 3-CD changer in any order you like.

3

1

4,5

2

4,5

 

 

 

 

 

 

 

 

 

 

 

MULTI JOG

 

 

COMPACT DISC RECORDER SL-PR300

 

 

 

 

 

 

REC LEVEL

POWER

 

 

 

OPEN /

DISC

 

 

 

 

 

–

+

 

 

 

CLOSE

SELECTOR

 

 

 

 

OPEN /

 

 

 

 

DISC 3

3

 

 

 

 

CLOSE

 

 

 

 

 

 

DISC 2

2

 

 

 

 

 

 

 

 

 

 

 

DISC 1

DIGITAL

CD

LINE

 

 

REC SELECTOR

 

 

PHONES

 

 

1

 

 

 

 

 

MIX BALANCE

MIN

MAX

 

 

 

 

 

 

 

 

 

LINE

CD

PLAY MODE

CD EDIT

CD REC

 

 

SYNCHRO

MENU

SET

CANCEL

 

 

FINALIZE

REC/

REC MUTE

 

 

 

 

7 CANCEL

DISC SELECTOR

 

 

CD1

CD2

CD3

 

3

CD REC

CD EDIT

FINALIZE

DISPLAY

1 2 3

 

4

5

 

6

 

 

7

8

 

9

 

 

0

>10

 

 

 

 

PLAY

 

CONTROL

7

 

MODE REPEAT

CD

CD-R/RW

4,5

•REC

 

FADE

SYNCHRO

REC MUTE

 

 

 

 

 

SELECTOR

 

 

MENU

 

 

REC

 

 

 

 

 

 

PITCH+

 

 

 

SET

 

 

PITCH–

CANCEL

PITCH 0

CANCEL

COMPACT DISC RECORDER

RAK-PR300

1 Load CDs in the 3-CD changer.

Note

•To close a tray, press the 0 button for the tray number that is open. If you press the 0 button for a tray number other than that for the tray that is open, the program may not be played correctly.

2 Load a recordable CD-R or CD-RW disc in the CDR tray.

• The disc is read.

3 Press the CD EDIT button (main unit/remote control) twice to select the Program Edit mode.

Main UnitRemote Control

CD EDIT

CD EDIT

 

•The unit may be required to read the TOC (Table of Contents) of the CDs loaded in the 3-CD changer. If this is done, “TOC

READING” is shown in the information display.

RQT6087

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Compact Disc Recorder Table of Contents Listening Caution User memoLaser product label has not been attached to this product Features Concerning CDs Storage precautionsHandling precautions Do not place or store CDs in the following placesConnections Analog ConnectionsDigital Optical and Coaxial Cable Connections ConnectionsDigital Connections Optical Cable Input/Output TerminalsComponents Main UnitRemote Control Sensor Headphones JackPhones Level Volume Control ComponentsDisplay Window Using the Remote Control Remote ControlUsing the Remote Control Using the Remote ControlInserting the Batteries To turn power to the unit on Power STANDBY/ON OperationsTurning the Power On and Standby Mode To put the unit in standby mode during operationCD Changer Continuous Playback Playing CDs using the CD Control Play pbuttonListening to CDs Press the Disc Selector 1 buttonListening to CDs CDR Playback OperationsRemoving a CD from the CDR Using the Remote Control to Control PlaybackTo stop CDR playback temporarily Press the CD or CDR button to select the deckPress the number buttons of the track you want to play Direct Playback of a Specific TrackForward and Reverse Search To select a two-digit track numberSkipping Tracks Setting the repeat play modeUsing repeat mode during program or random play modes Repeat PlaybackRandom Playback To release the random playback modeTo adjust the pitch of a CD during playback CD Playback Pitch ControlPress the SET button to start program registration Programming Playback Using Main Unit ControlsLoad CDs into the trays of the 3-CD changer Repeat steps 4 and 5 to program up to a maximum of 32 stepsPress the CD Control Play p button to start programmed play Programming Playback Using the Remote ControlPress the Play Mode button Press the SET buttonRepeat steps 5 and 6 to program up to a maximum of 32 steps Press the p button to start program playRecording onto CD-R/RW Discs Add Finalize FeatureTo enable the Add Finalize feature Read through this section before recordingTo increase the recording level from Line Recording onto CD-R/RW DiscsManual Recording Turn the Multi JOG to select High Press the SET buttonTo record silence in the recording Press 1REC/REC Mute to put the CDR in recording pause modeWhen recording is complete Auto Track function onSynchronized Recording of 3-CD Changer Playback To add track marks automaticallyAuto Track function off To stop the recording at any time When ADD FINALIZE? is shown in the information windowSelect and stop the CD to be recorded Checking a track number during recordingSelect a disc and start playback When recording completesDisc Dubbing Insert a recordable CD-R or CD-RW disc in the CDR disc trayWhen the first track has been stored in memory Listening Edit RecordingLoad a recordable CD-R or CD-RW disc in the CDR tray Program Edit RecordingLoad CDs in the 3-CD changer Recording process startsSelect and enter the disc number Select and enter a track numberRepeat steps 4 and 5 to continue programming tracks Setting the Unit for High-speed Recording Pess the SET buttonStart playing of the source unit Press the Synchro button main unit/remote controlSynchronized Recording from External Sources Synchronized recording to the CDR from an external sourceMixed Input Recording Load a recordable CD-R or CD-RW in the CDR disc trayMIX Balance Line Special Recording Edit Operations Skipping a Recorded Track on a CD-R or CD-RW Track SkipErasing a Track or Tracks Erase Function CD-RW only Special Recording Edit Operations Erasing All Tracks Disc Erase Function CD-RW onlyLoad the CD-RW to be erased in the CDR disc tray Press the Finalize button main unit/remote control Finalizing a DiscLoad a finalized CD-RW disc into the CDR disc tray Press the SET button again to confirm the operation Resetting the Unit to Factory Default Settings 4 CancelSetting the Clock Ways to change or adjust the time displayExample Setting the Clock To ascertain the correct timeTimer Operations Timer Play wake-up playWith Unit Power Turned On Timer OperationsSet the power to standby mode From Standby ModeLoad a recordable CD-R or CD-RW disc into the CDR CD and CDR Messages Message Significance RemedyCD and CDR Messages Disc FullScms Serial Copy Management System Troubleshooting CommonSpecifications Product serviceProduct information

SL-PR300 specifications

The Panasonic SL-PR300 is a remarkable portable CD player that combines advanced technology with user-friendly features. Released during the height of the CD boom, it showcased Panasonic’s commitment to quality audio and innovative design in portable music solutions.

One of the standout features of the SL-PR300 is its compact and lightweight design, making it easy to carry for on-the-go listening. The player measures just under 1.5 inches thick, allowing it to fit comfortably into bags and backpacks, making it a popular choice for travel enthusiasts.

The SL-PR300 is equipped with a high-quality 1-bit Digital-to-Analog Converter (DAC), which ensures clear and precise sound reproduction. This technology enhances audio quality by reducing distortion and providing a more immersive listening experience. The player supports a range of CD formats, including standard audio CDs and CD-R/RW discs, making it versatile for various music collections.

One of the innovative features integrated into the SL-PR300 is the anti-shock technology, designed to minimize skips and interruptions during playback. This is particularly beneficial for users who enjoy listening while they move, providing a smooth experience even when walking or exercising.

Additionally, the SL-PR300 offers a rechargeable battery option, providing convenience and sustainability for music lovers. Users can easily recharge the player, reducing the need for disposable batteries and allowing extended listening sessions without interruption. The long battery life also ensures that users can enjoy their music without frequent recharging, perfect for long journeys or outdoor activities.

For ease of use, the SL-PR300 features an intuitive interface with simple controls, allowing users to navigate their playlists effortlessly. The large, easy-to-read LCD screen provides essential information such as track number and playback time, enhancing the overall user experience.

In terms of connectivity, the player includes a headphone jack, providing a direct and personal listening experience. The SL-PR300’s durable construction ensures it can withstand the rigors of daily use, making it a dependable choice for music enthusiasts looking for a reliable portable CD player.

In summary, the Panasonic SL-PR300 stands out in the portable audio market with its combination of advanced technology, user-friendly design, and portability. With features such as anti-shock technology, rechargeable battery options, and high-quality audio output, it remains a noteworthy choice for anyone looking to enjoy CDs on the go.
Top Page Image Contents