Panasonic SL-PR300 Repeat steps 5 and 6 to program up to a maximum of 32 steps

Page 22

Listening to CDs

6 Select a track number (1-99) using the R (reverse) or F (forward) buttons, and then press the SET button.

SET

1. Select the track.

2. Enter the selection.

7 Repeat steps 5 and 6 to program up to a maximum of 32 steps.

•If you try to program over 32 steps, “MEMORY FULL” will be shown in the information display, and the programming func- tion ends automatically.

•Pressing the s(stop) button ends the programming function.

8 Press the p button to start program play.

•During playback, the disc number, track number and play time of the track are shown in the information display.

•The numbers of the tracks that have been played are cleared from the music calendar. They are displayed again when pro- grammed play is completed.

•Operation stops automatically (and “STOP” is shown in the information display) when all programmed tracks have been played.

•If the p (play) button is pressed at a specific step in a program, the programming function will end and playback will start from Step 01, not the step currently shown in the information display.

To clear a step (track) from the program

To remove a programmed track, while in the CD stop mode, press the R (reverse skip) or F (forward skip) buttons until the track you want to erase is shown in the information display. Press the CANCEL button to erase the track from the program. The step number for each track following the one erased is automatically reduced by one (i.e., steps are renumbered). To erase the entire pro- gram, press the CANCEL button until “PG NO PROGRAM” is shown in the information display.

To change the contents of the program

In the CD stop mode, press the SET button followed by the CAN- CEL button. Programmed tracks will be erased in the reverse order of when they were entered (starting from the last track pro- grammed). Press the CANCEL button twice to erase one track. Continue erasing in this manner until all of the tracks you wanted to remove are erased. Enter new tracks into the program by follow- ing programming steps 5 and 6.

To check the contents of the program

To check the tracks you have entered into the program, press the s (stop) button, and use the R (reverse skip) or F (forward skip) buttons to review the programmed tracks. The program steps (PG S**) and track numbers will be shown in the information dis- play one at a time as you toggle through the program (S: Step; **: step number).

To return to continuous playback

In the CD stop mode, repeatedly press the PLAY MODE button on the remote control until the total playing time is shown in the infor- mation display.

Remote Control

PLAY

MODE

RQT6087

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Compact Disc Recorder Table of Contents User memo Listening CautionLaser product label has not been attached to this product Features Concerning CDs Storage precautionsHandling precautions Do not place or store CDs in the following placesConnections Analog ConnectionsDigital Optical and Coaxial Cable Connections ConnectionsDigital Connections Optical Cable Input/Output TerminalsComponents Main UnitRemote Control Sensor Headphones JackPhones Level Volume Control ComponentsDisplay Window Using the Remote Control Remote ControlUsing the Remote Control Using the Remote ControlInserting the Batteries To turn power to the unit on Power STANDBY/ON OperationsTurning the Power On and Standby Mode To put the unit in standby mode during operationCD Changer Continuous Playback Playing CDs using the CD Control Play pbuttonListening to CDs Press the Disc Selector 1 buttonListening to CDs CDR Playback OperationsRemoving a CD from the CDR Using the Remote Control to Control PlaybackTo stop CDR playback temporarily Press the CD or CDR button to select the deckPress the number buttons of the track you want to play Direct Playback of a Specific TrackForward and Reverse Search To select a two-digit track numberSkipping Tracks Setting the repeat play modeUsing repeat mode during program or random play modes Repeat PlaybackRandom Playback To release the random playback modeTo adjust the pitch of a CD during playback CD Playback Pitch ControlPress the SET button to start program registration Programming Playback Using Main Unit ControlsLoad CDs into the trays of the 3-CD changer Repeat steps 4 and 5 to program up to a maximum of 32 stepsPress the CD Control Play p button to start programmed play Programming Playback Using the Remote ControlPress the Play Mode button Press the SET buttonRepeat steps 5 and 6 to program up to a maximum of 32 steps Press the p button to start program playRecording onto CD-R/RW Discs Add Finalize FeatureTo enable the Add Finalize feature Read through this section before recordingTo increase the recording level from Line Recording onto CD-R/RW DiscsManual Recording Turn the Multi JOG to select High Press the SET buttonTo record silence in the recording Press 1REC/REC Mute to put the CDR in recording pause modeWhen recording is complete Auto Track function onTo add track marks automatically Synchronized Recording of 3-CD Changer PlaybackAuto Track function off To stop the recording at any time When ADD FINALIZE? is shown in the information windowSelect and stop the CD to be recorded Checking a track number during recordingSelect a disc and start playback When recording completesDisc Dubbing Insert a recordable CD-R or CD-RW disc in the CDR disc trayWhen the first track has been stored in memory Listening Edit RecordingLoad a recordable CD-R or CD-RW disc in the CDR tray Program Edit RecordingLoad CDs in the 3-CD changer Recording process startsSelect and enter a track number Select and enter the disc numberRepeat steps 4 and 5 to continue programming tracks Setting the Unit for High-speed Recording Pess the SET buttonStart playing of the source unit Press the Synchro button main unit/remote controlSynchronized Recording from External Sources Synchronized recording to the CDR from an external sourceMixed Input Recording Load a recordable CD-R or CD-RW in the CDR disc trayMIX Balance Line Skipping a Recorded Track on a CD-R or CD-RW Track Skip Special Recording Edit OperationsErasing a Track or Tracks Erase Function CD-RW only Erasing All Tracks Disc Erase Function CD-RW only Special Recording Edit OperationsLoad the CD-RW to be erased in the CDR disc tray Finalizing a Disc Press the Finalize button main unit/remote controlLoad a finalized CD-RW disc into the CDR disc tray Press the SET button again to confirm the operation Resetting the Unit to Factory Default Settings 4 CancelWays to change or adjust the time display Setting the ClockExample Setting the Clock To ascertain the correct timeTimer Operations Timer Play wake-up playWith Unit Power Turned On Timer OperationsSet the power to standby mode From Standby ModeLoad a recordable CD-R or CD-RW disc into the CDR CD and CDR Messages Message Significance RemedyCD and CDR Messages Disc FullScms Serial Copy Management System Troubleshooting CommonProduct service SpecificationsProduct information

SL-PR300 specifications

The Panasonic SL-PR300 is a remarkable portable CD player that combines advanced technology with user-friendly features. Released during the height of the CD boom, it showcased Panasonic’s commitment to quality audio and innovative design in portable music solutions.

One of the standout features of the SL-PR300 is its compact and lightweight design, making it easy to carry for on-the-go listening. The player measures just under 1.5 inches thick, allowing it to fit comfortably into bags and backpacks, making it a popular choice for travel enthusiasts.

The SL-PR300 is equipped with a high-quality 1-bit Digital-to-Analog Converter (DAC), which ensures clear and precise sound reproduction. This technology enhances audio quality by reducing distortion and providing a more immersive listening experience. The player supports a range of CD formats, including standard audio CDs and CD-R/RW discs, making it versatile for various music collections.

One of the innovative features integrated into the SL-PR300 is the anti-shock technology, designed to minimize skips and interruptions during playback. This is particularly beneficial for users who enjoy listening while they move, providing a smooth experience even when walking or exercising.

Additionally, the SL-PR300 offers a rechargeable battery option, providing convenience and sustainability for music lovers. Users can easily recharge the player, reducing the need for disposable batteries and allowing extended listening sessions without interruption. The long battery life also ensures that users can enjoy their music without frequent recharging, perfect for long journeys or outdoor activities.

For ease of use, the SL-PR300 features an intuitive interface with simple controls, allowing users to navigate their playlists effortlessly. The large, easy-to-read LCD screen provides essential information such as track number and playback time, enhancing the overall user experience.

In terms of connectivity, the player includes a headphone jack, providing a direct and personal listening experience. The SL-PR300’s durable construction ensures it can withstand the rigors of daily use, making it a dependable choice for music enthusiasts looking for a reliable portable CD player.

In summary, the Panasonic SL-PR300 stands out in the portable audio market with its combination of advanced technology, user-friendly design, and portability. With features such as anti-shock technology, rechargeable battery options, and high-quality audio output, it remains a noteworthy choice for anyone looking to enjoy CDs on the go.
Top Page Image Contents