JBL 9950-0113-001, 8950-0113-001, 7950-0113-001, 3950-0113-001 Symptom Possible Problem Solution

SYMPTOM	POSSIBLE PROBLEM			SOLUTION	NOTE
CHARGING SYNCING
iPod will not charge	Wrong adaptor is used.			Ensure correct adaptor is
				used for your specific iPod
				model.
	The iPod is not making full			Ensure iPod is seated
	contact with the dock station.			securely into the docking
				station.
iPod is not recognized by the	Third party accessories may			Make sure you do not have
computer when docked into	be conflicting with the USB or			the JBL Radial connected to a
the JBL Radial or there is an	firwire signal.			USB or firewire hub.
error in data transfer.				Connect the JBL Radial
				directly into the computers
				USB or firewire port.
	USB or firewire port is not			Try connecting the USB or
	supplying enough power			firewire cable to another port
				on the back of the computer.
SPECIFICATIONS
Manufacturer		Harman Multimedia
Model		JBL Radial
Driver (Full Range)		Hercules 45mm
Drivers (Tweeter)		Odyssey 25mm
Power		1 x 30 watts (woofer),
Dimensions		2 x 15 watts (tweeters), at 1% THD
Width:		12.0 inches	305mm
Depth:		5.25 inches	135mm
Height:		10.5 inches	270mm
Input Impedance		>10k Ohm
Signal-to-Noise ratio		>85dB
Frequency Response		70 – 20 kHz
Input Sensitivity		250 mV rms for rated power output
USA/Canada Power		120 volts, 60Hz AC
Europe/UK		220-230 volts, 50 or 60 Hz AC
Japan		100 volts, 50 or 60 Hz AC
Australia		240 volts, 50 or 60 Hz AC
Maximum Power Consumption		55 watts

UL/CUL/CE Approved

950-0113-001 9 JBL® Radial Manual