JBL 10950-0113-001 Too much bass or treble, Source device Make sure that all signal, Receptacles

SYMPTOM	POSSIBLE PROBLEM	SOLUTION	NOTE
SOUND QUALITY
Too much bass or treble	JBL Radial is being overdriven	Ensure that the JBL Radial is
	by an amplified audio source.	connected to an appropriate
		source device.
		Make sure that all signal
		cables are inserted snugly into
		receptacles.
	Volume level may be too high	Check volume of source
		device.
		Some devices will distort the
		output signal if the volume is
		set to maximum.
	Check the EQ setting on your	JBL Recommends that the
	iPod or source device.	source device EQ be set to
		flat or OFF
JBL Radial emits a loud hum	Input cables not plugged in	Check input cable connection.
or buzzing noise.	properly.
Speaker system experiences	Input cable may be picking up	Wrap up excess input cable
radio frequency interference	interference.	in order to make as short as
or picks up a radio station.		possible.

950-0113-001 8 JBL® Radial Manual