JVC DR-MV5S manual Semiauto Clock Set, Manual Clock Set, Auto Daylight Saving Time

EXIT

		INITIAL SETTINGS EN 21
	Clock Set	7 Press rt to select “TIME ZONE”, then press ENTER. Press
		rt to select “AUTO” or the desired time zone, then press ENTER.
		● Each time you press rt, the time zone changes as follows:
Perform clock setting only if the clock has not been set correctly by		{AUTO{ATLANTIC{EASTERN{CENTRAL{
the Plug&Play setting.		MOUNTAIN{PACIFIC{ALASKA{HAWAII{
		(back to the beginning)
● Turn on the unit.
		NOTE:
● Turn on the TV and select the AV mode.
		If an incorrect time is displayed by the Plug & Play function, you may be
● Slide the TV/DVD switch to DVD.
		receiving the clock setting data of a PBS channel from an adjacent time
		zone or from an incorrect PBS channel from a cable TV system. If you
		selected “AUTO” for the host channel in step 5, be sure to select the
		correct time zone manually.

8 Press SET UP to complete the setting.

IMPORTANT:

ENTER

rtwe

Turn off the unit after performing Semiauto Clock. “AUTO” will appear on the front display panel while the clock is being set. The current clock time will appear automatically when the clock setting is complete.

Auto Daylight Saving Time

This function enables automatic adjustment of the unit’s clock at the start and end of Daylight Saving Time.

With Auto DST activated, —

—on the first Sunday of April at 2:00 AM, the clock is adjusted to 3:00 AM.

—on the last Sunday of October at 2:00 AM, the clock is adjusted to 1:00 AM.

NOTE:

Timer recording may not function correctly at the time Daylight Saving Time is adjusted.

SET UP

Semiauto Clock Set

You can change the host channel/D.S.T. (Daylight Saving Time)/ time zone setting manually.

NOTE:

The time set previously will be erased when “AUTO CLOCK ”, “HOST CH”, “D.S.T.” or “TIME ZONE” setting is changed.

1 Press SET UP to access the Main Menu screen.

2 Press w e to select “INITIAL SET UP”, then press t.

3 Press w e to select “CLOCK	DVD SET UP		FUNCTION SET UP INITIAL SET UP
SET”, then press t.	TUNER SET			CLOCK SET
4 Press rt to select “AUTO
		AUTO CLOCK			ON
CLOCK ”, then press ENTER.		HOST CH [CATV]			AUTO
		D.S.T.			AUTO
Press rt to select “ON”, then		TIME ZONE
					AUTO
press ENTER.
5 Press rt to select “HOST
	SET UP		OK	SELECT WITH [CURSORS]
				THEN PRESS [ENTER]

Manual Clock Set

1 Press SET UP to access the Main Menu screen.

2 Press w e to select “INITIAL SET UP”, then press t. 3 Press w e to select “CLOCK SET”, then press t.

4 Press rt to select “AUTO
	DVD SET UP		FUNCTION SET UP INITIAL SET UP
CLOCK ”, then press ENTER.	TUNER SET			CLOCK SET
Press rt to select “OFF”, then
		AUTO CLOCK					OFF
press ENTER.		TIME				- - : - -
5 Press rt to select “TIME”,		DATE				1/1 (SAT)
		YEAR
						2005
then press ENTER. Press rt		D.S.T.
							ON
until the desired time appears,	SET UP		OK		SELECT WITH [CURSORS]
then press ENTER.	EXIT		SELECT		THEN PRESS [ENTER]

6 Press w e to select “OK”, then press ENTER for confirmation.

7 Set the date and year in the same way as in step 5.

●Holding rt changes the time in 30-minutes interval, or changes the date in 15-days interval.

8 Press rt to select “D.S.T.”, then press ENTER. Press rt to select the desired setting, then press ENTER.

ON: Adjustment will be made by the built-in clock itself.

OFF: Select when Daylight Saving Time does not apply to you.

CH”, then press ENTER.

SELECT

9Press SET UP to complete the setting.

Press rt to select “AUTO” or the

desired PBS channel number, then press ENTER.

NOTE:

Some PBS channels do not transmit clock setting data.

6 Press rt to select “D.S.T.”, then press ENTER. Press rt to select the desired setting, then press ENTER.

AUTO: Select if you want to adjust your unit’s clock automatically by the incoming signal from the host channel. Be sure to select the correct time zone manually in step 7.

ON: Adjustment will be made by the built-in clock itself.

OFF: Select when Daylight Saving Time does not apply to you.