JVC DR-MV5S manual Dubbing An Entire Disc, VHS/DVD Dubbing, REC Mode Progressive Scan

				EDITING EN 39
	Disc Dubbing (From DVD To VHS)			1 For DVD deck
				Load a disc you want to dub.
				For VHS deck
Dubbing An Entire Disc
				Load a cassette with the record safety tab intact.
				2 Press VHS/DVD on the unit repeatedly or VHS on the remote
You can easily use this unit for dubbing without connecting any
other equipment.				control so that the VHS lamp lights up on the unit.
				3 Press REC MODE repeatedly to set the recording mode.
	● Turn on the unit.			4 Press }DVD to select the dubbing direction.
	● Turn on the TV and select the AV mode.
				● “}” lights up on the unit.
	● Slide the TV/DVD switch to DVD.
				5 Press and hold DUBBING for more than 3 seconds to start the
	● Make sure that both the DVD deck and the VHS deck are in the
		stop mode.		dubbing.
	● Set “SUPERIMPOSE” to “OFF”. ( pg. 73)			● If the tape has not been rewound, the VHS deck rewinds the tape
				automatically. When the VHS deck has finished rewinding, dubbing
			}DVD	begins automatically.
				● After dubbing is completed, the VHS deck rewinds the tape
				automatically and the unit shuts off.
				● To stop dubbing, press 8.

STANDBY/ON		VHS	DVD			REC	NOTES:
			VHS	DUBBING DVD		CH	● When you turn on the unit next time, press }DVD so that “}” lights
			VHS/DVD
S-VIDEO	VIDEO	AUDIO					off before performing any operations. If it is not done, recording on
						DV IN
							the VHS deck is not possible.
							● It is not possible to start dubbing if the unit retains a memory of the
			VHS/DVD		DUBBING		resume points. Press 8 twice to clear the resume points.
							● There may be a discrepancy of several seconds between where you
							intend dubbing to start, and where it actually stars.
							● The superimposed indication during the operation or dubbing is not
							recorded.
							● When the end of the tape is reached during dubbing, the tape is
		VHS					ejected and both deck stops.
			DVD				● When the progressive mode is set, “}” does not light up on the unit.
							Press PROGRESSIVE SCAN so that video output indicator (	)
							lights off on the front display panel.
							● It may be impossible to dub a DVD-R or DVD-RW (Video mode) disc
							recorded on the devices from other manufacturers or on a PC. In
							such case, perform “Manual Dubbing (From DVD To VHS)”
							( pg. 40).
							● It is not possible to perform other operations like Live Memory
							Playback. Check the recorded program on the disc after dubbing.
							● If “]” lights up on the unit and you play back a DVD VIDEO disc, the
							images dubbed to the VHS deck may not be output to the TV
							properly.

REC MODE

PROGRESSIVE

SCAN