46 EN ADVANCED PLAYBACK
MARK
TOP MENU
ENTER 
rtwe
MENU
SLOW – (3) 
SLOW + (5)
Resume Function
It is possible to memorize the position where you stop playback and resume playback from that position.
●Be sure to set “RESUME” to “ON” or “DISC RESUME”. ( pg. 74)
1 Press 8 during playback to memorize a resume point.
●The unit enters Resume Stop mode and memorizes the position where you have stopped playback as a resume point. (The inside of the disc status indicator on the front display panel blinks while memorizing.)
●The unit retains a memory of the resume points of the last 30 discs played back, even though they have been ejected if “RESUME” is set to “DISC RESUME”. ( pg. 74)
●To clear the resume points:
(The inside of the disc status indicator stops blinking and lights.)
When “RESUME” is set to “ON”:
•Press 1 to turn off the unit.
•Press x (OPEN/CLOSE) to take out the disc.
•Press 8 in stop mode.
•Press TOP MENU to display the top menu, then start playback by selecting an item, etc.
•Press MENU to display the disc menu, then start playback by selecting an item, etc.
REMAIN 
DISPLAY 
ANGLE
SUBTITLE
Still Picture/Frame-By-Frame Playback
1 Press 9 to pause during playback.
2Press SLOW – (3) or SLOW + (5) to activate
● Each press of SLOW – (3) or SLOW + (5) advances/reverses the still picture frame by frame.
●
● To resume normal playback, press 4.
Slow Motion
1 Press 9 to pause during playback.
2Press SLOW – (3) or SLOW + (5) for 2 or more seconds.
● Each press of SLOW – (3) or SLOW + (5) increases the slow motion speed for each direction (from 1/16 to 1/2 times the normal speed).
● Slow motion for reverse direction cannot be performed with Video CD discs.
When “RESUME” is set to “DISC RESUME”:
•Set “RESUME” to “OFF”. ( pg. 74)
•Press 8 in stop mode.
•Press TOP MENU to display the top menu, then start playback by selecting an item, etc.
•Press MENU to display the disc menu, then start playback by selecting an item, etc.
2 Press 4 in stop mode to resume playback. The unit starts playback from the resume point.
NOTES:
●“DISC RESUME” setting works on DVD VIDEO, VCD and already finalized
●If you stop the playback of a disc for which a resume point has already been memorized, the memory will be updated with the new resume point.
●After the unit has memorized the resume points for 30 discs, remembering a new resume point will cause the unit to delete the oldest memorized point. Stopping playback of a disc for which a resume point is already stored may change the order in which the points are stored. This may potentially change the order in which points are deleted.
●When the unit memorizes a resume point for a disc, it also remembers audio language, subtitle and angle settings.
●This function may not work for some Video CDs.
●When “RESUME” is changed to “ON” or “OFF” ( pg. 74), resume points of the discs memorized with “RESUME” set to “DISC RESUME” will be cleared.
●Resume points are memorized for each side of a
Skip Search
During playback, press 
.
●Each press initiates an approximately